Question about GE JVM1640 Microwave Oven

1 Answer

The lights under the microwave will not shut off

The Bright-night-off digital display still work and the beeps atill work as well but the lights just stay on all the time. i have subsequently removed the light bulbs. i suspect a stuck relay mabey. Any ideas??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 8,820 Answers

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

Posted on Nov 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My GE stainless steel 1100 watt microwave starts beeping out of the blue and the display panel shuts off and when I open the door it resets itself and then starts to beep when I close the door again.


Try removing the power cord for about a minute, push all the touch pad 'buttons' and then plug it back in. If this doesn't work it sounds like you may have a bad door interlock switch or a bad PCM .. Good luck !

Feb 11, 2015 | GE XL1800 1100 Watts Microwave Oven

1 Answer

I have a GE micro ange hood Model# HVM1540DM1BB, bulbs blew,change them out, now the lights will not shut off. I have powered it down over night, pluged it back in next morning same thing. Any ideas


There is a possibility that the light relay is stuck on. Sometimes a sharp tap on the relay will fix it. If not the control board will need replacing.

Sep 26, 2014 | GE Microwave Ovens

1 Answer

New unit used 3 days. Microwave beeps and screen goes to menu, or set time screen. Sometimes changes the date all by itself. Does this in the middle of the night all night long.


I advice you to contact service if it has guarantee. This seems to be a psychological problem about your oven(!). Technical person need to do an electronic research surgery on its board to see if there is any wrong thing.

Nov 05, 2012 | Whirlpool GH7208XR Convection / Microwave...

1 Answer

Microwave Cooktop / Night Light not working


I would check the door switches with a digital meter, set to ohms, disconnect one wire from switch and test for open and short by pressing door switch, if you hit one that tests the same when pressing and releasing, switch should be replaced.

Mar 06, 2012 | GE Microwave Ovens

1 Answer

The display works (clock, mode, etc) I can push


We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week or so.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Apr 27, 2010 | Whirlpool GH9176XM Microwave Oven

2 Answers

Microwave beeping and F2 error code


hi,
The F2 code is a keyboard failure. Since it's intermittent I would check for a loose wire/connection. open the control panel and reset the ribbon cable on the circuit board....


thank you,
vijay (vote for me)

Sep 23, 2009 | KitchenAid KHMS155LSS 1000 Watts Microwave...

1 Answer

Light under unit stays on


open the oven there are two or three safty switches near door one of the switch is for light if it is short then only light will remain on.by opening door light should come on set the time and hit start light will come again. replace that switch and it will be ok

Aug 07, 2009 | GE Advantium 120 Convection/Microwave Oven

1 Answer

GE JVM 1650 Microwave Night Light does not work


We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

Sometimes this will also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

In your case, it may just be a shorted dimming diode, a black diode usually located between the light relay and the connector.

(Not to be mistaken for the tinier red-bodied diode on the other side of the relay that protects the relay coil).

If it is shorted, you will have bright lights in both the bright and dim settings.

In case you or someone you know has the tools and experience to desolder and solder small components, the replacement rectifier diode is not critical and can be any of these:

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007, NTE116, or NTE125 some of which are available form Radio Shack.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting, testing, and locating components.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

8aed03b.jpg

7a34fe2.jpg

Feb 13, 2009 | GE JVM1650 1000 Watts Microwave Oven

1 Answer

Night Light


Replace the touch panel. One or more buttons are failing.

Feb 03, 2009 | Frigidaire PLMV168 Microwave Oven

1 Answer

Kenmore microwave 721 Displays 66:66 and beeps


Try first unplugging power cable for ten minutes, and see if it clears the error.

Oct 24, 2008 | Kenmore 63672 Convection/Microwave Oven

Not finding what you are looking for?
GE JVM1640 Microwave Oven Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...