Question about Dell UltraSharp 1907FP 19" LCD Monitor

1 Answer

Lack of contrast and faded text

Dell UltraSharp 19" monitor is faded when attached to my emachine computer but not when attached to an old Dell. I've gone through all the display adjustments and told it to reset to factory settings. On board Nvidia GeForce 6100 graphics.

Posted by on

  • rbmeek Nov 22, 2008

    Problem solved. New drivers for monitor and graphics card. All better.

  • Anonymous Dec 26, 2008

    faded text

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The Ultrasharp monitors need a good video card to drive the quality that you have come to know. The emachines lack the memory and quality to drive the monitor. If you don't have a 16meg video card with DVI, you will only get the basic analog qualities of the monitor. I have the same problem at work some of our older machines that have onboard graphics cards that are mediocre. However, when you plug the Ultrasharps into an NVIDIA 32meg card, the resolution is beautiful. I suspect that this is your problem.

Jason from Connecticut

Posted on Dec 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell ultrasharp 1907fp bad contrast


I have seen a few of these monitors that when the display is dark in certan area's this usually indicates that one of the CCFL lamps has gone bad or there is a problem with the Analog/Digital Board, you can find the boards on ebay, but be VERY Certain that the board you order is the same that you take out of the monitor, as there are a lot of monitors that use the same simular boards but they are all different.

Sep 24, 2012 | Dell UltraSharp 1907FP 19" LCD Monitor

1 Answer

Dell 1900 fp monitor driver


Go to GOOGLE and type DRIVERS for your exact product and model of monitor, which will hopefully give you the correct drivers to download. Softonic would be one place to look. CNET would be another.

Sep 19, 2012 | Dell UltraSharp 1900FP 19" Flat Panel LCD...

1 Answer

Background too white


I looked this up in my Dell 1908FBPL instructions which should be similar. On the lower right edge, you should have Brightness & Contrast and Auto Adjust controls. These controls interact so you may have to fiddle back and forth to get it right. First, note whether brightness becreases when you press and hold the down (-) button. Check to see whether Auto Adjust changes anything. Also try turning the monitor off then back on.

Sep 02, 2012 | Dell UltraSharp 1907FP 19" LCD Monitor

1 Answer

The monitor just shows colored stripes


The most likely problem here is a lack of drivers.
To test it, see if you can start your computer in safe mode. If you are still getting only stripes no matter what you do, your monitor may very well be bad. I would attach another monitor to the computer just to be sure.

Sep 18, 2010 | Dell UltraSharp 2408WFP 24" LCD Monitor

1 Answer

Monitor Problem


lower right hand side are some monitor setting buttons.

They should let you configure your brightness and contrast,also sharpness.

One button may do an auto fix.

Also in your win control panel click on display, advanced. and set your resolution until your happy with the picture.

Jan 06, 2010 | Dell UltraSharp 1907FP 19" LCD Monitor

1 Answer

Small blue screen that says '' No composite input signal''


go to menu on the monitor and choose setting then reset the default

Nov 16, 2008 | Dell UltraSharp 1907FP 19" LCD Monitor

2 Answers

Power button


remove the button arm, and drill a hole thru the casing. Use a pin to turn it on.

Jul 11, 2008 | Dell UltraSharp 1905FP 19" LCD Monitor

1 Answer

Unable to adjust contrast


http://support.dell.com/support/edocs/monitors/r83546/EN/setup.htm#Using the OSD
"NOTE: When using DVI source, the contrast adjustment is not available"

Dec 06, 2007 | Dell UltraSharp 1905FP 19" LCD Monitor

1 Answer

Dell Ultrasharp 21' monitor


I had the same issue. I pressed and hold the + button and the monitor did an auto adjust and the pop up stopped.

Aug 23, 2006 | Dell UltraSharp 1702FP 17" Flat Panel LCD...

Not finding what you are looking for?
Dell UltraSharp 1907FP 19" LCD Monitor Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...