Question about Computers & Internet

1 Answer

The problem was fixed for 6 reboots, but has come back - can you help please?

Posted by kiwigales on Nov 19, 2008 Report abuse
The computer switches on, but won't boot. The processor fan can be heard running fast and it will stay in this state for hours. Still need a solution for this problem? Try our Premium Assistance plan Best Solution posted on Nov 19, 2008
vipin_yadav1
Rank: Apprentice
Rating: 100%, 1 votes
Simple dear, I think that you can see the power led and hdd led but it wont boot. Right. So switch the system and than open the cabinet and than remove the RAM , CLEAR THE DUST ON THE SLOT AND RAM. THAN REPLUG IT IN THE SAME WAY. PLEASE DO NOT INSERT IT FORCEFULLY BECAUSE IT WILL GO EASILY IF YOU ARE INSERTING IT IN RIGHT WAY. SO CHECK THE POSITON OF THE NOTCH ON BOTH THE RAM AND SLOT OK

AND THAN START THE SYSTEM. THIS MIGHT DEFINATELY SOLVE YOUR PROBLEM.

Posted by on

  • kiwigales Nov 20, 2008

    IBM Thinkcentre A51 8424 34M

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 80 Answers

So switch off the system and than open the cabinet and than remove the RAM , CLEAR THE DUST ON THE SLOT AND RAM. THAN REPLUG IT IN THE SAME WAY. PLEASE DO NOT INSERT IT FORCEFULLY BECAUSE IT WILL GO EASILY IF YOU ARE INSERTING IT IN RIGHT WAY. SO CHECK THE POSITON OF THE NOTCH ON BOTH THE RAM AND SLOT OK

AND THAN START THE SYSTEM. THIS MIGHT DEFINATELY SOLVE YOUR PROBLEM.

Please use blower or vacuum cleaner to clean the dust in the system and take precaution that your system get proper cooling and is kept in dust free area. So that this problem will not arise repeatedly

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

9 Answers

How do I report someone on facebook who is not my friend, but is harassing me? This person is friends with other friends I have, but not me, but he is saying things in comments on posts about me and...


Hi,

- You can add him on your friend list then report him using the "Report/Block this Person" link that appears at the bottom of their profile. And then remove this user from your Friend List and block.

- You can ask your friends who has this person on their friend list to report him.

hope this helps

Jun 23, 2010 | Facebook Social Network

1 Answer

Hello, my name Mrs. Remka, an assistant principal at Hugh B. Bain Middle School in Rhode Island. A group of students created a group called, I Make you cry (mrs. Remka) and posted inappropraite comments....


http://www.facebook.com/help/?page=798

How do I report abuse?The most efficient way to report abuse is to do it in the same place i...The most efficient way to report abuse is to do it in the same place it occurs on Facebook. For example, if you receive a harassing message in your Inbox, you can report the message by clicking on the "Report" link next to the sender's name. If you receive a harassing message from a person who is one of your Facebook friends, you should remove the person as a friend and report the message. Reporting a message as harassing will automatically add the sender to your Block List. You can also use the "Report/Block this Person" link that appears at the bottom of the abusive user's profile.

Apr 09, 2010 | Facebook Social Network

2 Answers

Can't find link: "Report Abuse"


Put the http address in your restricted addresses in control panel under internet optons.

Aug 28, 2009 | Computers & Internet

1 Answer

I want Office Porte 33.3 modem driver.


of reporting suspected abuse on FixYa.com. We do not accept problem posts through the "Report Abuse" form. Please post your technical problem on the appropriate product page, where Experts can view your post and s

Feb 19, 2009 | Microcom Computers & Internet

1 Answer

Ignition switch won't turn off motor


pull the steering wheel and replace the key switch assembly. Dealer part.

Nov 25, 2008 | 1993 Lincoln Continental

1 Answer

Follw-up


check the mass air flow sensor if still no spark check the coil packs for power if they dont have power check all fuses and relays if they are all fine look for a short

Nov 17, 2008 | 1996 Pontiac Grand Am

1 Answer

Re: Creeping black line


Hi mrtaz187 -
Well, the pixels can go bad on the LCD monitors and from what you are explaining, it certainly sounds like this is the case on your monitor. I wish that I had better news for you but the monitor will have to be replaced. Sorry. I know that Walmart has had these monitors on sale in the past and they have offered a 13 month warranty. If you could return it from where you bought it (under warranty), that would be the best solution... otherwise it will need to be replaced because usually the bad pixel problem grows worse over time.

Hope that helps,

Take care,
Michael

Nov 12, 2008 | Computers & Internet

2 Answers

FE-280 Olympus


u did see this after pic below, and you have tried deleted usb controllers in device manager then reboot c5374dd.jpg can u tell me if, cam lights up/does windows make a connection sound, when usb from cam is connected? posted by Jordiane on Nov 18, 2007 Report abuse

It says it is unable to find a camera connected to the USB ports. Any idea where I could find a driver to help this or is it another problem?
Have the same problem? Click Here
6 Other Users Have The Same Problem Comment by Emilie, posted on Nov 21, 2007 The display doesn't turn on when the camera is turned on unless I switch the mode on the dial. The camera turns off when I toggle the zoom.
Comment by Guest, posted on Nov 29, 2007 Zoom does not work
Comment by Guest, posted on Dec 27, 2007 I receive the message the software was unable to find an Olympus digital camera conected to a USB port on your computer.
Comment by petedrum, posted on Dec 23, 2007 Same Problem. Tried it on two XP computers, can't find camera on either. Camera lights up when plugged in.
Comment by Kellib, posted on Jan 01, 2008 I'm having the exact same problem with my camera. i can't figure anything out with it and if i plug the usb into the computer, i hit ok for PC and then my computer freezes. someone please please help me figure this out
View All Best Solution posted on Dec 24, 2007 2%20stars.png
noavatar_s.png Mickoolz
Rank:nonexpert_s.gif Apprentice
Rating: 70%, 3 votes

I had this same problem, I'm using Vista on my HP laptop and I managed to correct it. Apparently HP like to customize Vista and when connecting some USB device's they don't recognise them as what they should. A USB mass storage device. You will need to connect the camera to the computer, the camera will come on then click the ok button so it selects PC. Wait until it finishes its search click cancel and open device manager, scroll down and below Network Adaptors you should see an expandable tree with an yellow exclamation mark named Portable Device's --> FE-280/X820/C520 you will need to right click on the FE-280/X820/C520 icon and select "Update driver software". Then select "Browse my computer for driver software" then select "Let me pick from a list of device driver's on my computer" Scroll down till you see "Universal serial bus controllers" then select "USB Mass storage device" in the next window. It should all work fine now! If it still doesn't work try selecting "Portable devices" then select "WPD File system device" --> "Microsoft WPD filesystem Volume Driver".
Hope it helps.

Cheers, Mick
Was this solution helpful? Show your Appreciation by rating it:

Jan 04, 2008 | Olympus FE-280 Digital Camera

1 Answer

Have you heard anything about this?


Hi, try the monitor on another PC , if you got a laptop you try it , to see if it is the monitor . The problem could the video card on your PC., let me know if the light is yellow or green.

Nov 21, 2007 | Dell E173FP 17" LCD Monitor

1 Answer

Sound problem in Panasonic TV bought in Poland


your friend is right you require pal system to run tv properly.

on the back side of your tv there might be switch pal/ntsc

if that system change over switch is not there then you are helpless

good luck.

Oct 17, 2007 | Televison & Video

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...