Question about Electrolux Epic 6500 Vacuum

1 Answer

Electrolux 6500 SR

I replaced the cord unit on my Electrolux 6500 SR with an exact factory replacement, and it works okay except for the fact that the cord light stays lit. Any suggestions? Thanks!

Rick

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 44 Answers

The cord light just indicates that the machine is plugged in and has power. In other words, you did great!

Posted on Jan 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epic 6500 Sr. Why does it keep turning on and off?


Electrolux Epic 6500 - Bag Full Indicator Bypass - YouTube

? 0:55
https://www.youtube.com/watch?v=YrMgoUAHcI4
Jun 23, 2013 - Uploaded by easilen
The rear pops off. There's a vac. ... Yeah, keep it. Undo Close ...Electrolux Epic 6500 - Bag Full Indicator ...

Questions and Answers for Electrolux Vacuum Unit

builtinvacuum.com/help/electrolux/qanda/main-central-unit.html
For Electrolux; Central Vacuum Attachment Kits and Hose and Tool Kits for Electrolux Attachment ... With a clean bag in, the unit starts up and immediately shuts off. If you hold ... From what I have read hear, it sounds like the motor is going. ... How can I fixmy electrolux epic 6500 SR vacuum? ..... It keeps cutting off and on.

Electrolux Epic 6500 SR Shuts off when power hose ...



Dec 28, 2015 | Electrolux Vacuums

1 Answer

Accessory compatibility between Electrolux Models 1521 and Epic 6500 SR


No, they have different connectors. 1521 uses a pigtail hose that has little metal clips. 6500 has a plastic end with an arrow that helps guide you for proper placement. Unfortunately you will need 2 separate hoses for the respective models.

May 12, 2015 | Electrolux Vacuums

1 Answer

Electrolux Epic 6500 SR cord will not rewind


Unfortunately most cord reels cannot be repaired and must be replaced as a unit.
That Vac Guy

Apr 13, 2013 | Electrolux Epic 6500 Vacuum

1 Answer

Cord will not retract on epic 6500 sr


Try tipping it on its end,or nearly so. Then tug gently and release until it retracts. This has worked for me nearly every time I'd tried on various Electrolux vacuums.
If this doesn't work, the vacuum needs to be taken to an authorized Aerus Electrolux store for repairs.

http://www.aerushome.com/storelocator/

Jan 14, 2011 | Electrolux Epic 6500 Vacuum

1 Answer

I have an Electrolux Epic 6500 SR vacuum and the hose end with the handle is separating. Power nozzle losing contact intermittently. Is this piece replaceable or repairable?


It is replaceable. Just take it to the nearest Aerus Electrolux store and the service tech will take care of it for you.
Go to the following site and follow instructions to find the stores nearest you.

Nov 18, 2010 | Electrolux Epic 6500 Vacuum

2 Answers

I have the electrolux epic 6500 sr. when i


As hooton8 stated i have the electrolux epic 6500 sr. as well and when i attempt to vacuum i turn it on and it turns off after about 3 seconds. new bag nothing stuck in tube. I turned dial to the right all the way. Works when hose is not connected..hose is clear.

Dec 05, 2009 | Electrolux Epic 6500 Vacuum

1 Answer

Repair manual for Electrolux EPIC 6500 SR


I don't have a manual for these but the trickiest thing about these units is taking them apart. If you have an Aerus/Electrolux dealer near you, it's not a bad investment to have them install the motor for you. You would probably receive a warranty with the work, and the things a long time. Great return on investment. But if you are determined to do it yourself, open the front of the canister and remove the bag. As you are looking at the front of the unit, there are two vinyl coverd strips that run the length of the unit. Pull forward on these strips and then pull out so that the vinyl seperates from the plastic underneath. Now grab the plastic strip with a pair of needle nose pliers and pull towards the front of the canister. These can be tough if the machine has never been opened up before, but pull as hard as you need to, to slide the strip out. Once both strips are out, turn the machine over, pull out on the sides of the bottom of the unit, and lift up. The bottom should come of relatively easily, and eveything will be exposed. Good Luck!!

Aug 19, 2008 | Electrolux Epic 6500 Vacuum

2 Answers

My Electrolux upright worked fine


Are you using the proper bag? There's a kill/reset switch that needs to be pushed down by the rim of the bag before the unit will run.

Jun 22, 2008 | Electrolux Epic 6500 Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Roger Potts

Level 3 Expert

694 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...