Question about Kenmore 20722

2 Answers

Kenmore 70 series will not drain or spin

My kenmore 70 series top load washer gets to spin mode and just makes a loud clicking noise ...The unit is about 6-7 years old...
I think it might be a coupler issue..
If it is the coupler do you honestly think I should repair it or just buy a new washer ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with my 20722 and checked the lid switch, if held in place it will spin. but the plastic casing that the screws went into is broke. How should I fix this?

Posted on Dec 20, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 367 Answers

It sounds like the lid switch. If it ws the coupler the water would drain. Check to see if the lid switch is clicking when you put the lid down. replace the lid switch. You have a great washer. Fairly cheap fix.

Posted on Nov 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore 70 series top load washer which will not go into the spin cycle. It is making a loud clicking noise


lean the washer back and look between the motor and trans,there is a coupler in the middle that most likey broke

May 04, 2010 | Kenmore Washing Machines

1 Answer

Kenmore 70 series


hello mam for two years you have not used the washer so the bearings may worned out so lubricate the bearings and check the belt should not have any cracks on it,and after lubricating run the machine without loading clothes the observe the noise if seems to be same then change the bearing to change the bearing call the engineer.

Sep 29, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Tub support broke


POST THE MODEL NUMBER PLEASE

Apr 16, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 90 series noise after spin


You need to replace the drive block and basket drive. You can download a tutorial to get you started at www.shop.washermd.com. The gearcase replacement tutorial will put you in the right direction. Dave

Mar 01, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Loud noise in slow down spin mode.


when it is in high spin then you stop the washer it makes a thumping noise until the basket stops sort of like a flat tire sounds to me like you need a drive block

Dec 18, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 70 series Agitation and Spin Cycyle clicking


Sounds like you have a broken motor coupler. Not expensive. #13 on the diagram. Part # 285753, dave www.washermd.com

5177aef.png

Dec 12, 2008 | Kenmore 22422 Top Load Washer

8 Answers

Kenmore Washing Machine 70 series


You most likely have a broken coupler between the motor and gearcase.
You can buy the part for about $10 or have someone come out and replace it for about $150-200.
If you will post the complete model number from the the washer so I can see which style cabinet you have, I will try to walk you through the repair. It isn't very complicated if you are handy with home repairs.
With the age of the machine it probably just needs a coupler, but it could also have a problem in the transmission or basket drive that has caused the failure.

Nov 13, 2007 | Kenmore 22422 Top Load Washer

2 Answers

Loud clicking noise - wont agitate or spin


I had the same clicking noise. Turned out to be the coupling between the motor and transmission. A $15 plus 1 hour labor fix

Nov 10, 2007 | Kenmore 22422 Top Load Washer

1 Answer

Series 70 Kenmore Washer Won't Agitate or Spin


baseball, sounds like a broken coupler, check out this post and post back, Catriver http://www.fixya.com/support/t144580-kenmore_8series_washer

Apr 26, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

618 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Fordexpert

Level 3 Expert

5363 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...