Question about Sampo LME- 32X8 32 in. HD-Ready LCD Television

Open Question

SAMPO 42" lcd hdtv

42" Sampo. needs som type of Y board. Can it be repaired?

Posted by on

1 Suggested Answer

  • 9 Answers

SOURCE: Image Board Assembly

I have the board, email me at masterhu @yahoo.com
thanks,

Plasma/LCD expert, source of parts/boards.

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The T.V has all sorts of pink lines and other distortions on the screen if you hit the side of it, it becomes crystal clear for a few hours is the video card going bad?


I have posted this solution for a few of the othe Sampo problems. This sounds similar. I had the same problem [sounds the same]. It was an assembly issue. the circuit board2_bing.gif in the middle twards the bottom was wedged in but not flat. the bend eventually caused the same type symptons. I removed the board, applied presure over a couple days, heated the board with hair dryer2_bing.gif and finally got the board to flatten somewhat. Also had to file one edge of the board to get it to set flat in its slot. Has worked since [over 3 years]. I do not recommend doing this unless you are prepared to throw it out, since this is very unorthodxed.

Sep 30, 2009 | Sampo PME-42S6 42 in. HD-Ready Plasma...

1 Answer

The fuse keep blowing out after a while on my Sampo 47in what do you think could be the problem?


Some board may be loose or you have a major power supply problem. recommend professional repair..

Mar 09, 2009 | Sampo PME-42S6WT 42 in. HD-Ready Plasma...

2 Answers

We are looking for a base for a Sampo 42" Plasma.


I have a PME-42S6 on Ebay that has a turning on problem it is a complete unit and work good if you can get it to turn on

Ebay # 120362175465

bid on it and pick it up and there is your stand.

Bob
678-333-6746

Jan 12, 2009 | Sampo PME-42S6 42 in. HD-Ready Plasma...

1 Answer

Need a remote control for Sampo pme 42-s6 (s) TV


I have a PME-42S6 on Ebay that has a turning on problem it is a complete unit and work good if you can get it to turn on

Ebay # 120362175465

bid on it and pick it up and there is your remote control
Bob
678-333-6746

Dec 24, 2008 | Sampo PME-42S6 42 in. HD-Ready Plasma...

2 Answers

I have good Power supply board for your Sampo 42S4 tv,


do you know if your power supply board will work for the Sampo 42S6?

If so, I am interested.

RyanHoffmeyer@hotmail.com

Sep 13, 2008 | Sampo PME-42S6 42 in. HD-Ready Plasma...

2 Answers

Image Board Assembly


these are availiable from charles hyde there are lcd inveters

Feb 06, 2008 | Sampo PME-42S6 42 in. HD-Ready Plasma...

1 Answer

"No Signal" floating notice on Blue Screen - No other picture


If all connections and the tuner have the same issue, you either have a power supply issue or a bad digital board.

Mar 29, 2007 | Sampo PME-42S6 42 in. HD-Ready Plasma...

1 Answer

Sampo PME-42S6 black screen


I have the exact same problem and sent an e-mail to Sampo in Taiwan today (March 3rd) with a technical explanation and description of the problem you have reported. I included information on the status of the LEDs inside the unit. My suspision is that the power distribution board has developed a fault. I am going to try to find out if a schematic is available to repair the board or if a new board can be purchased. I will provide an update when I have one. Glenn

Feb 08, 2007 | Sampo PME-42S6 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Sampo LME- 32X8 32 in. HD-Ready LCD Television Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sampo Flat Panel Televisions Experts

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

60775 Answers

Are you a Sampo Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...