Question about Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

1 Answer

Top drawer no power

Hi there our Fisher and Paykel DD603 blew the circuit board and the power lead to the top drawer, these have been replaced but there is no display on the fron, it will not turn on, where do I check next please?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 145 Answers

This looks like an old question, but for the sake of refference I will respond to it..

On your dd603, the heater plate in the bottom of the drawer acts as a dropping resistor in the power supply circuit. The main computer is often replaced incorrectly when the the machine is "dead". The correct procedure is to check the heater plate first and there are several resistance tests that are done at the connector for the heater plate. Usually the overload on the plate itself is blown out. This will cause a dead machine.
Some of the other experts object when we say "You should get a service manual" but that advice is warranted here.

You can get one here:
http://fisherpaykelparts.net/index.php?categoryid=115&productid=18

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i repair fisher paykel dd603 problem top drawer stuck on fast cycle, bottom drawe stuck on normal cycle


you will need to replace both draws control boards, with the dd603 control boards they have a small touch button panel on the top of the board which they didn't put a protective layer or plastic over and basically what happens is steam gets on the copper tracking and corrodes it hence the fact it doesn't work anymore, all new control boards even the replacement for yours comes with a plastic strip over the board. hope this helped

Oct 06, 2014 | Fisher and Paykel Dishwashers

1 Answer

Top drawer can not be open


If this is a double drawer dishwasher and bottom drawing is functional but top drawer won't open means the controller on top drawer is faulty or power circuit is locked. If turning the mains power off and back on makes no difference then controller could be the problem. One way to test is to take the controller from bottom drawer and replace that in the top drawer. This requires a lot of patience and experience with electronic stuff. If you are not brave enough to test then call the technician. The controller is about $200 to buy. Make sure the mains power socket is taken out before working on the dishwasher internals.

FISHER PAYKEL DISHWASHER DD603 Parts

Feb 10, 2014 | Fisher and Paykel Dishwashers

1 Answer

FISHER PAYKEL DD603 DISHWASHER AND TOP DRAWER HAS NO POWER


I know you did this but check your breaker. The other thing I would ask is has there been any storms dishwashers are the worst for power surges I see it all the time sucks but it normaly a 250 fix for a new control board

Apr 29, 2010 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

No power to top drawer so I cant even run a


If the controller is faulty then you will not see any life in the drawer unit. The controller is mounted on the front of the unit behind the door panel.

Oct 19, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

E-mail for Fisher Paykel DD603 manual


Josh, you will need to have a Tech out to look at it... F/P will not sell you parts to repair it. The F1 indicates that the flood switch has been tripped. There are many possible causes for this but probably the upper drawer link support has broken and is getting stuck between the lid and the drawer in which case you will need a new lid and link support.

May 05, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

Fisher Paykel DD603 top drawer will not drain


Hi and welcome.
Either your hubby forgot to knock the plug out of the dishwasher connection on the new disposal, or he does not have a dual-air gap installed and the hoses to the dishdrawers do not have a high loop to prevent back-siphoning into the drawer...


Jan 04, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

Fisher Paykel DD603


The top drawer on our DD603 top lid doesn't seal allowing water to spray out and down the sides.

Aug 10, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

Not finding what you are looking for?
Fisher and Paykel 24 in. DD603H W Built-in Dishwasher Logo

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Gere knutson

Level 3 Expert

842 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Blake

Level 2 Expert

136 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...