Question about D-Link AirPlus DI-524 Wireless Router
I have a router D-link 524 which i have to configure, ii did portforwarding (i dont know whether i did right or wrong, help me in this also) now i have struck in virtual server page in router i dont know how to fill it and what to do next. after this configuration i have to fix DVR through it. please help me. please give me step by step details.
Ok, IP port forwarding is pretty straight forward. On the firewall configuration screen specify the outbound port and inbound port. The first should be what you want people on the outside to see it as, the second is what you want yourself to see it as. Next, virtual server pages are setup in your web server software, never seen it configured through the router...but it should be essentially the same thing. You specify a web content location if possible this is a physical path; you would need the permissions set to read only for HTML, read and execute for CGI/Perl or DHTML; and then you would setup domain information, etc or leave it blank and use the IP/Port. Finally if you don't change the /etc/hosts file you might run into some problems computer side because your internal ports will be different then the outside ones. This can effect 2 way communication. So you set it so that the address at say port 80 internally is redirected to say 8080 instead. This way whether your outside or instide you can type the address the same way.
Posted on Dec 09, 2008
Tips for a great answer:
May 15, 2011 | D-Link AirPlus DI-524 Wireless Router
Feb 26, 2010 | D-Link AirPlus DI-524 Wireless Router
Dec 26, 2009 | D-Link AirPlus DI-524 Wireless Router
Nov 30, 2009 | D-Link AirPlus DI-524 Wireless Router
Sep 24, 2009 | D-Link AirPlus DI-524 Wireless Router
Sep 03, 2009 | D-Link AirPlus DI-524 Wireless Router
Oct 28, 2008 | D-Link AirPlus DI-524 Wireless Router
Sep 15, 2008 | D-Link AirPlus DI-524 Wireless Router
107 people viewed this question
Usually answered in minutes!