Question about Samsung HT-Z310T Theater System

1 Answer

Can not get 3 speakers on my samsung home theater to work!

All is hooked up and the right and left front speakers are working, but there is no sound coming from the center, and R and L back speakers.

Posted by on

  • OuChristine Dec 07, 2008

    All the cables are hooked up between the home theatre system and the digital cable box. The right and left front speakers are working, but there is no sound coming from the center. If I plyg the centre plug into either the right or left plugs it works.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 226 Answers

There are a few settings that will just give you a stereo output. The first one is with the Pro Logic II. If you press the PLII Mode button on the remote it will go through a series of settings from MUSIC ➞ CINEMA ➞ PRO LOGIC ➞ MATRIX ➞STEREO ➞ MUSIC. Pro Logic setting will only produce sound from the front speakers and Stereo from the front speakers and the sub. Put it on Matrix for 5.1 surround sound.
Also for speaker settings follow the instructions below.
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.
In Stop mode, press the MENU button.
Press the Cursor down button to move to Audio and then press the ENTER button.
In the SPEAKER SETUP, press the ENTER button again.
Press the Cursor button to move to the desired speaker and then press the ENTER button.
For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows : SMALL ➞ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speaker is connected.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
It also seems that with this system, if you are on 5.1 surround but your music source is only in stereo, you will only hear stereo.

Posted on Nov 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Awia speaker ok for home thaeter


Just about any speaker will work for home theater. As long as it makes sound.

Of course, you will need some type of surround sound processor (like a surround receiver) and other speakers to connect to the front left, center, front right and surround connections.

Some speakers will work better than others.

I will not get into any specifics because there is WAAAAY to much information to get into. Do a little research on home theater systems and how to design, hook up etc.

May 02, 2014 | Aiwa Audio Players & Recorders

2 Answers

I WANT TO HOOK UP MY ACER ASPIRE 7745G LAPTOP TO MY SAMSUNG HOME THEATER SYSTEM SO THE SOUND FROM THE LAPTOP COMES OUT TRUE MY SAMSUNG HOME THEATER SPEAKERS. MY ACER HAS HDMI, VGA, MY HOME THEATER SYTEM...


HDMI should transmit both Video and Audio. It's the best quality of all of the methods. Just make sure that you have your sound set to HD sound. You can do that by right-clicking your speaker icon at the bottom (by the time), and choosing Volume Control Options and make sure that Digital Audio (HDMI) is selected.

This would work for Windows 7 or Vista Operating Systems. XP is similar, but you will have to play around with.

Apr 01, 2011 | Computers & Internet

1 Answer

Just hooked it up and only 2 front speakers work . all speakers work when switched around any tips


You don't mention having followed the manual so...

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Samsung-HT-BD1250T-Home-Theater-Systems-manual/id/23336ag421/t/2/

Did the speaker setup test tones work on all channels?

Mar 30, 2011 | Samsung HT-BD1250 Theater System

2 Answers

My sony dav dz270 home theatre has no sound through centre and rear speaker


You must have changed the listing mode to stereo.In that mode only the left / right & subwoofer will work. Press the surround button and change it to any other mode .

Mar 14, 2011 | Sony DAV-DZ720 Theater System

1 Answer

5.1 Dolby system does not work with the T.V.


Solution: connected the rear right and left wires to the Front , left and right wires......................and everything works the way I anticipated without any technical problems....... the woofer works on a separate circuit, so I continue to receive the "low" frequency..

Oct 01, 2009 | Memorex MiHT5005 Theater System

1 Answer

How do i hook this up Samsung HT-WX70 Theater System with Wireless Speakers


1. Connect the front left, front right, center, and sub woofer speakers to the back of the home theater system.

2.
With the home theater system off, insert the TX card into the TX Card connection (WIRELESS) on the back of the home theater.
Important:
Make sure to insert the TX card with the slanted portion of the card facing left.

3. C
onnect the rear left and the rear right speakers to the back of the SWA-3000.

4.
Plug the power cord of the SWA-3000 into an electrical wall outlet, and then switch the power switch on the back of the SWA-3000 to [ON]

Hope this helps!

Jun 27, 2009 | Samsung HT-WX70 Theater System

1 Answer

Gurus, I just bought Samsung Home Theater System which i connected to my Hitachi TV with HDMI cable. I have a Optical Cable going from HT to my TV Optical port. I have another connection from my cable


On the remote control for the Samsung Home Theater System look at the bottom left to a button that says "MODE", those moods change the sound each speaker gives off. if that doesn't work, you might need new wiring because there are other wires that are more durable than the ones that come with it, much better too.

Jun 02, 2009 | Samsung HTP-1200 System

1 Answer

Rear spekers no sound


Is the source signal of a surround sound type? Also, be sure that the rear speakers are on, (if your receiver has a speaker switch on it), and they are hooked up properly.

Mar 23, 2009 | Sony HOME THEATER SYSTEM System

1 Answer

Speaker Problem


no sound out of my Lg-lht754 system, only video. Could someone help me out.

Dec 10, 2007 | LG LHT734 System

Not finding what you are looking for?
Samsung HT-Z310T Theater System Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...