Question about Sony KP-46S25 TV

2 Answers

Tracking??? I have a sony kp-46S25 and at the top and bottom looks like tracking is off, and on the right side at top and bottom there is a blus line, on the left is a red line. I thought it was the lights in the back tried adjusting them and that did nothing. Can somebody plz help me...greatful for any and all help. Thanks

Posted by on

  • johndavella Jan 02, 2008

    it looks like the hoz hold is gone. sound fine, vert fine. color great. setup screens are fine. prob same from all inputs. I don't see any adj for horz osc.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 230 Answers

Convergence problem. Replace 2 IC's stk .

Posted on Aug 19, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

If everything else is fine-then the set needs to have the picture size adjusted. Sometimes this happens when there is a power spike. Otherwise you either have a voltage reduction on the curcit the set is plugged into, or your house. Or the power supply is gowing and not putting out enough juice to the set.

Posted on Jul 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony KP 46225



Check this site for more details. "Electro-help" is the site name. Search it by google search. You can locate it, either at the bottom of the first search page, or at the top of the second. It is an electronics equipments repair help site in English.
You can get details about this fault from here.

Jun 17, 2012 | Sony KP-46S25 TV

1 Answer

Betty\r\nI have a KP-46S25 that has the colors and


You will need to have a TV tech rework or replace your convergence board. Thanks for asking!

Jun 07, 2010 | Sony KP-46S25 TV

1 Answer

I have a Sony KP-46S25. The screen is cracked. I


There are 2 screens for this set, a protective (outer) screen and a fresnel (inner) screen. Which one needs to be replaced?

Dan

Apr 08, 2010 | Sony KP-46S25 TV

1 Answer

My Sony KP-46S25 TV is blinking red light and is not turning on, please advise.


Please update this with the blink count. The standby light shouldbe blinking a repeated count with a pause. This will indicate the problem circuit and allow me to provide you with the probable defective part(s).

Thanks,
Dan

Jan 07, 2009 | Sony KP-46S25 TV

1 Answer

Sony KP-46S25


You have to find the reason why the fuse is blowing. to do that you have to open the up the TV anyway. try another fuse and see if it burns. fuses blow because there is more current going through it than the fuse amperage can hold. it is probably a burnt resistor.

Nov 28, 2008 | Sony KP-46S25 TV

2 Answers

Sony kp-51hw40


blue CRT is most likely shorted. When the blus screen comes up are there concave lines in the screen as well?

Sep 07, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

FOGGY COLOR


Sure, you can fine service menu with universal remote control. Just find properly code number for Sony tv.

Aug 11, 2008 | Sony KP-46S25 TV

1 Answer

Sony KP-46S25


I don't think so it's curves in.

Dec 05, 2007 | Sony KP-46S25 TV

1 Answer

Sony kp-46s25


It sounds like you are going to need to have the convergence IC's replaced. Not really a hard job, but the job requires the proper tools, soldering skills, and a service manual to get the proper part numbers and to perform convergence alighnment in the service menu after the IC's are replaced. Good Luck

Mar 28, 2007 | Sony KP-46S25 TV

1 Answer

SONY KP-46S25


A "Gray Scale" adjustment may solve you problem. If one of the picture tubes is set too high it will cause these RETRACE lines. Then too a weak picture tube might cause this. If the horizontal lines are one color: red, green,or blue then whichever color that is shown would tell you which tube is set too high. Your set has 3 screen controls that control the brightness of each tube. One may need to be turned down a little. Stargazer

Mar 11, 2007 | Sony KP-46S25 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75774 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...