Question about Sharp CD-XP120 CD Shelf System

1 Answer

CD Player not working

Hi, I have had this stereo system for 3 years and had it in storage for the last month. I've just set it back up and everything works except for the CD player. It doesn't recognise that there is any disc in the player and just skips from Disc 1 through to Disc 3 and then stops and displays the message 'No Disc'. I would be very grateful if you could share any advice in solving this. Thanks!

Posted by on

  • peter551 Feb 20, 2009

    Sharp CD-XP120 CD Shelf System

    CD skipping.

    Problems develops within a few minutes of being brought into use.

    Have tried cleaning the disc and the optical reader but without effect.

    Am trying to locate a replacement CD reader module.

    Any ideas?


  • Anonymous Feb 22, 2009

    It goes from disks 1, 2, and then 3. Error message no disk in cd player. When there are three in the cd slot.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Since the unit was in storage for a while dust may have settled on the lens.Try cleaning the lens.

Posted on Mar 22, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Samsung SCM-7450 Hi-Fi System. The CD player has stopped recognizing that there are CDs ready to play. Any suggestions?

There is nothing you can do and I doubt leaving the CDs in the unit would have made any difference with the problem you have now.
The CD player is an integrated unit with tape player, turntable etc so there are presumably no connections on the back of the unit that would allow you to connect a new CD player and run it through the unit. However, if it does have compatible connections then that is what I would do.

Dec 26, 2015 | Audio Players & Recorders

1 Answer

2004 GMC Sierra 2500HD with factory Bose stereo system but no on-star, put an aftermarket clarion CD/DVD player in it over 2 years ago i put in the adapter for making the Bose factory system work and

either your connectors need cleaning or maybe a break in the wiring. Is there on spot where both wires come together if so check there.If there is any plugs, pull them apart and clean them with contact cleaner

Dec 15, 2014 | 2004 GMC Sierra 2500HD

1 Answer

My JVC stereo doesn't play cd's anymore, still runs audio for tv, and radio. What is best, low price stereo option i can hook speakers up to and play cd's again?

The CD player might just need it's lens cleaning. Best way to do this is taking the top off and cleaning the lens with either Servisol Video 40 or CD lens cleaning fluid.

Mar 03, 2013 | JVC MXKB30 300W 3-Disc CD Shelf System...

3 Answers

CD Player not working

i have an older machien here its a mini hifi system fw 540c it wont play any cd's i put into it it skips tru all 3 trays and than says no disc or disc not finilised. i had it in storage for about 4 months over a winter worked fime b4 can some one tell me what could help before i trow it away (>-_-)> ty<(-_-<)

Mar 04, 2008 | Teac GF-350 CD Shelf System

1 Answer

Technics SA GX130D receiver amp keeps cutting out

This is either due to heating problems or You may need a new power unit inside.

Try having the amp out in the room so it has plenty of air, make sure nothing is blocking those vents


Jan 01, 2008 | Audio Players & Recorders

3 Answers

Fw316C cd player will not read discs

Buy A CD Lens Cleaner and put it in to the CD Player and keep retrying until the drive plays it and then follow the instructions for the CD Lens Cleaner after its finished try playing a CD if it still wont play try another disc and if it does not play that try reset the player by unplugging it for five seconds if it still wont play the CD drive has failed in the drive and you need a new stereo. Stereos dont last forever so dont be surprised if you need to buy a new one

Aug 17, 2007 | Philips FW316C37 Shelf System

1 Answer

Faceplate not responding / acting very weirdly

Sounds like a bad connection with the faceplate and the multi connector that the faceplate mates with when closed. check for dirt and bent pins on both connectors. Luck

Dec 14, 2006 | Sony CDX-CA900X CD Player

Not finding what you are looking for?
Sharp CD-XP120 CD Shelf System Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

74999 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

5318 Answers

Are you a Sharp Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides