Question about Husqvarna Riding Lawn Mower Yth24v48ls 48 Inch Cut

1 Answer

Stalls When engaging the blade clutch

Tractor stall when pulling up the blade engagement knob. If I pull the choke and engagement knop together I can keep the tractor running, but with the choke disengaged and the blades engaged the tracktor does not have the power to drive and mow the lawn

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 54 Answers

Check that the blade brake is disengaging. Slip belt off blade spindles and check that they spin freely. Check underside of deck for clogged grass, ropes, wire, etc.

Posted on May 07, 2012

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
lester482529
  • 226 Answers

SOURCE: mowing deck makes ticking noise when blades are engaged.

A FEW THINGS TO LOOK AT ARE ,1THE PULLY SHIELDSMAKE SURE THEY AREN'T BENT TO CLOSE TO THE PULLEY'S.2 THE PULLEY BEARING'S MAY BE WORE OUT AND TO BREAK .3LOOK UNDER THE DECK TO MAKE SURE YOU DIDN'T GET SOMETHING TRAPED IN THE CUTTING DECK.HOPE THIS HELPED.

Posted on Jun 11, 2009

  • 41 Answers

SOURCE: blades not engaging

Tim, first turn key on engage and disengage blade button. See if you can hear the clutch making a clicking noise. If not check switch., if not your problem is in the clutch.

Posted on May 29, 2009

  • 376 Answers

SOURCE: knob on lawn tractor for blade engagement

Sounds like you need a new PTO switch.

Posted on Jun 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a craftsman EZ3 917.272121 mower engine e stalls when blade switch is pulled


If you are sitting on the tractor seat and the engine stalls when engaging the PTO mover blades I would check the switch under the seat.

This seat has a saftey switch to assure that the operator is in a safe location before engaging the the blades. Also if the blades are engaged and the operator leaves the seat the blades will stop. If a young rider with insufficient weight the blades will not engage.



26147998-f1dbbl4o5m3nghfc10hihvyr-4-0.jpg Hope this helps?

Mar 31, 2016 | Craftsman Garden

1 Answer

Goes dead when disengaging brak


Lawn Tractor stalls after engaging blades or releasing brake ...

www.shopyourway.com > Manage My Life > Questions
Scenario 2: Engine started, as above in scenario 1 and manaul brake lever is engaged. Again ... Lawn Tractor stalls after engaging blades or releasing brake .... I am goingto replace that anyway but it almost seems my problem is electrica

Sep 14, 2015 | Garden

1 Answer

REPLACED CLUTCH ON ZR 550 CLUTCH ENGAGES , BUT WHEN FULLY RELEASED BIKE JUDDERS THEN STALLS OUT . TRY TO ADJUST & GEARS WONT ENGAGE .


So if you raise the revs to say about 4000 rpm and let the clutch out does it stall or judder or both will it engage at all and pull away ?

Mar 07, 2015 | Motorcycles

2 Answers

Scotts L2048 lawn tractor deck wont engage


You need to check the wires from the clutch, with the ignition on pull the pto switch out there should be a 12 volt supply at the wires if not replace the pto switch, if you have 12 volts then it is the clutch itself, they are not realy repairable, so may need a replacment.

Jul 16, 2013 | Garden

1 Answer

14sb engine running when blade clutch is engaged the lawnmower stalls.


Normally I believe this mower to have a Kawasaki engine, and the main jet and 'pilot air hole' need to be cleaned. You are running a lean condition, and when the blade is engaged, the engine does not have enough fuel to continue the extra load. A small test for this is to engage the blade and the choke at the same time. If the engine has enough fuel to continue running and engage the blade, this confirms the lean fuel condition. Cleaning those jets will solve the issue.

I’m happy to assist further over the phone at https://www.6ya.com/expert/rolandw_c013176d62ee17ae

Nov 08, 2009 | John Deere 420,1020,2010,2020,2510,2520...

1 Answer

Engine dies when I engage the electric clutch for my mower


Possible short to ground in the clutch wiring

Oct 19, 2009 | Craftsman Garden

1 Answer

Tractor starts, stalls when blade is engaged, or brake released


you have a safety switch malfunctioning or a transistorized relay not working properly. Go to www.partsdirect.com, this is sears website. It should be able to find and illustrated parts list for your mower.

Sep 28, 2009 | Craftsman 20 hp 42 in. Deck Lawn Tractor -...

1 Answer

I have a Sears 26 hp garden tractor that stalls when I let off of the clutch/brake or engage the mower blades. I have bypassed the under seat swith, and I have also bypassed the clutch/brake switch. The...


does it run off of a pto system or is it a lver type if its a lever type there is a switch under the lever also you might have something caught in the deck causeing it not to engage blades if i can further help e-mail me wade at wadembly@aol.com

Jun 24, 2009 | Craftsman 26 Hp 54" Deck Yard Tractor

1 Answer

Stalls when engage blades in forward, but cuts fine in reverse


Did you try to disengage the safety feature that should shut the tractor off when the blades are engaged and the tractor is placed in reverse? I believe that it is located under the shift leaver

May 14, 2009 | Mtd Garden

Not finding what you are looking for?
Husqvarna Riding Lawn Mower Yth24v48ls 48 Inch Cut Logo

703 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

J. Bradshaw

Level 2 Expert

121 Answers

Jay Finke
Jay Finke

Level 3 Expert

1389 Answers

lnbn1975

Level 2 Expert

204 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...