- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Nikon download software is called Nikon Transfer 2. I would remove the SD card from your camera and slide it into the SD slot on your Mac. If you have an iMac, the slot is located just below the CDROM slot on the right side. Do not do this by feel. Look as you insert the card because if you insert it in the CDROM slot, you may not be able to extract it. If you have a MacBook or MacBook Pro, check the manual for the location. When the computer recognizes your SD card, it will either open Nikon Transfer 2 or a folder will appear on your desk top. If Nikon Transfer does not open, just copy your pictures from the SD card folder to a folder on your Mac.
ALTERNATE WAY TO TRANSFER PHOTOS AND VIDEOS TO A COMPUTER If your photos and videos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos and to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.
The Olympus SP-800uz camera does not come with a CDROM.
The software for Windows is available on the internal memory of the camera, if you did not format / delete it! If you are using Windows, the software should popup a message to install it, when there is no SD-card installed in the camera (only internal memory), if you connect the camera to the computer.
As an alternative, you can download another free and much better Olympus software program, the Olympus Viewer 2. See here (you need to put in your cameras serial number to download it): http://support.olympus-imaging.com/ov2download/index/?Lang=ENU
Firstly you need the software CDROM that was supplied with your camera.
Secondly, you need a lead that has a connector on one end that plugs into a socket on your camera and has a USB connector at the other.
If you do not have the software CDROM, go to the manufacturer's website, click support and find a download of the software for your particular camera. If it isn't available you have a problem!
Install the software, it includes a driver which your computer needs so it can recognise your camera. Run the software and follow the on screen instructions. At some point you will need to connect your camera to your computer. Do not connect your camera until your computer tells you to. Use one of the USB sockets. This is a small rectangular shape that will match your lead. If all goes to plan, your computer will display "found new hardware." Just follow the on screen directions. You may be asked to restart your computer at some point, this is normal.
I bought this camera off ebay. I do not have any software for it. I cannot get it to transfer pictures to my computer. I think i need to install a driver. It is a Sharp 3x Optical Zoom Digital Still Camera VE-CG40. Where can I download a driver?