Question about Tascam US-144 Sound Card

Open Question

No cue preview in my headphones

I use Ableton Live 6.0.10 and am a Mac user with Leopard. I use a Tascam US-144, driver version 1.11, firmware version 1.12, and USB 2.0. My only issue with the Tascam is I cannot preview songs with my headphones. In Ableton, I have my master output routed to channels 1/2 and cue output to 3/4. I can hear the master output in my headphones but not the cue. I have tried routing my master to 3/4 and cue to 1/2, but same problem. How can this problem be solved? Can it? There is nothing in the Tascam control panel which allows me to route where the cue output goes.

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 979 Answers

SOURCE: TASCAM US 144

Are these problems that have cropped upover time, or is this a new installation?
accordianman

Posted on Apr 05, 2008

  • 4 Answers

SOURCE: Cannot install TASCAM US 144 driver

Maybe you need to upgrade your usb drivers

Posted on May 27, 2008

  • 3 Answers

SOURCE: what cables for yamaha keyboard psr295 to connect with tascam 144

There are different options depending on what you want to achieve. If you want to send only MIDI data to your PC (for example, to run a VST instrument), then you can use a standard MIDI cable to connect the "out" on your keyboard to the "in" on your Tascam. You should also be able to use the Yamaha USB cable to connect directly to your computer, which would then bypass the Tascam (still giving you the same outcome, but without the need to buy any extra cables.
However, if you want to send the audio data (i.e. the actual sound) of the keyboard to your PC, you would simply use a standard guitar lead from the line out of the keyboard into the line in (both, if your keyboard has stereo outs) of your Tascam. This will eliminate any need for VST instruments, as you will be recording the audio signal directly.

Posted on Sep 10, 2008

Faridbanga
  • 63 Answers

SOURCE: tascam us-144 mkII now working with cubase le4

better , you can use it by nuendo or cubase sx. over all you try it cubase device setup and click vst system or switch vst audio bay. for more help call me +8801711904316

Posted on Apr 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mac drivers


Hello there. a quick google dive pulled up thefollowing page on TASCAM's website

http://tascam.com/product/us-144/downloads/

The second catergory listed would be drivers for MacOS. From that list,the 2.00 driver, which would be the second in the list, would be the most updated driver.

I hope this helps.

Oct 22, 2010 | Tascam US-144 Sound Card

1 Answer

I have been given a 144mk2 but it has no driver disc can you tell me where I can download/purchase the driver. Thanks.Alex. Ps I live in the UK


Here is a link to the US-144 drivers:-
http://www.tascam.com/products/us-144;9,15,70,19.html

Apparently there have been problems with this device - it is recommneded to use the lastest firmware.

Nov 02, 2009 | Tascam US-144 Sound Card

1 Answer

TASCAM US 144 and Mac incompatible???


A lot of the Audio drivers or Tascam and m-audio devices really only work for windows 32 bit reason i tried installing the same stuff for windows 64bit won't work in less u have vista 64bit But regular windows 32 bit works with every program out there. The mac if it did work it should pick up a signal if it worked properly but it sounds like the mac don't read it even with drivers .

This also could be a problem with your device if you had the same problem with it last time. replace it with a new one and try the install again on your computer and see if it works after that.

Aug 14, 2009 | Tascam US-144 Sound Card

1 Answer

Us 144 firmware not updating with Lepord


Try going to Add/Remove software and removing tascam software. Then, unpack your new drivers.

Nov 27, 2008 | Tascam US-144 Sound Card

2 Answers

Tascam US-144 problems with ableton live and in general


Im using Vista on a Sony Vaio FW11E with Core 2 Duo Processor. 3Gig ram. Its not working properly with me either. Its a loan of a mates. Ableton and Windows Media Player just keep stopping for a second every few seconds! Very annoying!

Sep 28, 2008 | Tascam US-144 Sound Card

2 Answers

Crashing every minute


I have found that the tascam 144 freezes the system evan when using other software than Live. It looks up with Cubase and other stuff evan Windows media player running sound thru the tascam. The problem is erratic and acts like an IRQ conflict and I still believe Tascam has fallen real sort of the mark by abandoning the customers. They are without a dought responsible for this problem and should step up and FIX it NOW. We are many having problems it is no fluke and I for one am discusseded with the total lack of support for what they have released as a viable and workable unit. LIES just to sell their stuff. I feel that Tascam's support should be in on this forum and start to work out the diffinative answere.

Anyone want to buy a cheap Tascam US 144 that won't do what you want. I achive move by plugging into the MIC or Line in on my system sound card than I get from the great Tascam device I bought in good faith and can't use.

THANKS FOR NOTHING TASCAM.

May 20, 2008 | Tascam US-144 Sound Card

1 Answer

TASCAM US 144


Are these problems that have cropped upover time, or is this a new installation?
accordianman

Apr 03, 2008 | Tascam US-144 Sound Card

3 Answers

Tascam us 144 sync problems with cubase le


Hey lea,

i have a similar setup (Cubase LE & Tascam 144) and each time i start up Cubase i have to make sure there is no digital input going to the tascam. once cubase is started up but no project loaded i plug in my spdif from my DAT machine and then open my project and all is fine. does that answer part of your question?

i have a different problem though, i'm trying to record my DAT tapes which are recorded at 32khz and cubase doesn't recognize that sample rate properly. it'll record no problem, and play them back fine, but exporting always creates mismatched sample rates in the exported file. sucks big time and i have got no idea on how to fix it either.

Mar 04, 2008 | Tascam US-144 Sound Card

1 Answer

Tascam 144


Check pan control and then try another set of phones...accordianman

Feb 12, 2008 | Tascam US-144 Sound Card

2 Answers

Only on one side


cheal faders balence on the mixer ect is that unit phantom powered ready also

Jan 27, 2008 | Tascam US-144 Sound Card

Not finding what you are looking for?
Tascam US-144 Sound Card Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tascam Computers & Internet Experts

Ben Armstrong

Level 2 Expert

334 Answers

Electric Dime
Electric Dime

Level 3 Expert

434 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Tascam Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...