Question about Citizen Watches

2 Answers

Cant se time Citizen 8988-q02047 HSB wristwatch

I need help in setting the analog time in the watch mentioned above. I have been trying for days with luck. Could you please help me out with instructions on how to set the analog dial in the watch.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

In the time mode, press the upper right button for 2 seconds and the time display will flash. Then press the same button untill the entire time will flash, or both hour and minutes flash at same time. When the hour and minutes flash at same time, this adjust mode is the adjusting of the analog left display (A1). Now, press the lower button for adjusting de hour shown at the digital display that shows the same hour at analog display. This method is to adjusting the 8982 that is the "father" of 8988. Like a Citizen collector, and don´t know any website that you can view the setting instruction of 8988, only the 8982 is disposable here: http://www.citizenwatch.com/downloads/techguides/8982.pdf

Posted on Aug 11, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Hi ...
This is a problem which I also had :) easy to overlook this moment - even in the original instructions. Very accurate description of all the features of Citizen Ana Digi Temp - including How to set time - and Synchronize Analog and Digital watch, you will find on
CITIZEN Ana Digi Temp cant se time Citizen 8988-q02047 HSB wristwatch - se-time-citizen-8988-q02047-hsb-z1tgajqyzq3nuh3bnjajzbko-5-0.jpg

Posted on Jan 11, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set day of week and date on men's Timex Indiglo easy reader analog wristwatch


The watch should have only one stem on the side, if this is so, you pull the stem all the way out two clicks to set time, but you pull it out only one click to set day and date, at one click you turn one way for date and other way for date, to use indiglo you push stem in. If your watch has more than one stem please notify me. I hope this helps!

Sep 14, 2011 | Watches

2 Answers

My Citizen Skyhawk analog UTC hour hand is alway 1 hour ahead of the UTC digital hour. I've tried reset and the hour/min hand alignment process without success. Any ideas other than sending in the watch...


You've gotta go to the set setting, one click out on the knob and cycle through all the timezones using the B button (the lower one) to change all the settings to OF (for winter) or ON (for summer time). According to their website FAQ, they can't determine when daylight savings time goes into effect for all the different time zones so there is no automatic changeover from SMT to normal and back again. Disappointing, I know. I just spent half an hour going through their website looking for some master switchover as well.

Mar 27, 2011 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

How do i set time , day and date , lost instructions citizen ecodrive calibre i think is the model !


The problem, as I have just discovered, is that when you go to the Citizen watch website listed above, you will get no help at all for the caliber 3100, "No document found..."
Try this link instead:
http://www.citizenwatch.jp/support/pdf/e310/e.pdf

Yes, this is the actual link to the full manual for the Caliber 3100 watch

Mar 02, 2011 | Citizen Eco Drive Calibre 3100 #BT0000 07E...

1 Answer

The digital and analog times dont match and need help setting time


browse through my tips and you will find link for all Citizen watch manual downloads.

Oct 01, 2010 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

Trying to set the analog time. got the day, date and year set. just need to set the hands for the time.


Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all Citizen watch manuals. Rate me, plz.

Feb 16, 2010 | Citizen Watches

1 Answer

Citizen Skyhawk - analogical time displaying incorrectly


Go to the "citzenwatch.com" website

Select "technical support"

You will see "setting instructions", where you must enter details of your watch.

Since they have a "setting "selection, your problem seems to be a common one!

Dec 27, 2009 | Citizen Skyhawk A-T Watch for Men

1 Answer

My Citizen Navihawk analog hands work, LCD Blank??


Being able to tap it and bring it back is a sure sign that there is a contact problem most likely in the circuit board. This is the worst case scenario. I would try going to a watch maker/technician to see of having the watch AC'd or reset fixes the problem. If not then I would have them look at the circuit board/movement. This may have been damaged during battery placement from too much pressure.

If you have trouble finding a qualified watch maker/technician you can go to Citizen.com to look up their service center or an authorized service center near you.

Sep 21, 2009 | Citizen Navitach JQ8020-52Y wristwatch

3 Answers

How to set the digital and analog as the same time


They are supposed to move in unison, if you are setting the digital time and the analog is not moving, there is a problem with the watch and it could need service. Here is a link to the manual for the watch, the movement for the Blue Angels is a C300 and you will see the manual also states the time mechanisms move in tandem.
http://www.citizenwatch.jp/support/pdf/coa/c300.pdf

Citizen does have service centers all over the globe, I am sure you can get the watch fixed if it does need service, You can find the local service center at the Citizen web site. Hope that helps.

Jan 30, 2009 | Citizen Blue Angels Skyhawk Watch

2 Answers

Problem Syncronizing the Analog & Digital


Hi ...
Oh yes, a problem which I also had :) easy to overlook this moment - even in the original instructions. Very accurate description of all the features of Citizen Ana Digi Temp - including how to set the time - and Synchronize Analog and Digital watch, you will find on
CITIZEN Ana Digi Temp

problem-syncronizing-analog-digital-z1tgajqyzq3nuh3bnjajzbko-3-0.jpg

Best Regards

Dec 06, 2008 | Citizen Blue Angels Skyhawk Watch

3 Answers

Date setting on Citizen 0510 chronograph


Try this method. Set the date until it reads a couple of days in the past and then set the correct time. Of course do not touch your date or time settings between the hours of 9PM-1AM. Wait until the next day, then move the hour hand forward until you reach the current date with the correct time.

Jan 09, 2008 | Citizen Eco-Drive BL5184-56L Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

1,342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citizen Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Jimmy Accardi

Level 2 Expert

97 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Citizen Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...