Question about Kenmore 73952 Gas Dryer

1 Answer

Electric dryer no heat and eletricut

I have a kenmore dryer no heat and when plug in the whole machine is charged with current when touched you get a shock mn:11066922500 sn:ms1802383

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Ck where ac cord is attached to dryer suspect burnt connections on terminal block ..or loose wire touching cabinet if block is burnt probably due to loose connection when screws were not tightened during install

Posted on Nov 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kenmore Elite quiet pak 9 dryer not heating. I replaced the heating element still no heat


I would say it would be the control panel (actually only thing it could be)
hydeparkappliancerepair.com or visit us on Facebook

Mar 07, 2014 | Kenmore Elite HE4 Electric Dryer

1 Answer

I have a kenmore dryer model 8904 and it runs fine but it wont heat up


These are several things that can cause this, I will list them in order of "most common" to "least common."
1) Most common: The heat element has failed, they break in two pieces, and must be replaced.
2) One of the thermostats or a fuse has failed, and must be replaced. If this is the problem, you must also clean the whole inside of the machine's ductwork of lint, or having replaced the part, it will fail again.
3) A wire has burned in two, often near the heating element. Rarely, it can also be near the electrical cord in the back of the machine.
Be blessed.

Feb 12, 2014 | Kenmore Dryers

1 Answer

Kenmore dryer, the dry runs, but does not heat


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Jun 11, 2010 | Kenmore 63942 Dryer

1 Answer

The fuse for the heat keeps blowing but dryer runs


if its an old round buss fuse that screws in the panel(especially an old 60 amp panel),sometimes the center where the fuse lands the insulation gets weak in this area and lets it arc over when the dryer calls for current to heat the element replace this with a sub box and breaker set-up.the other thing it can be is the element is touching the units case and grounding out causing the same problem

Jan 25, 2010 | Kenmore 82822 Electric Dryer

2 Answers

Kenmore dryer makes no heat


replace the heating element. Or the control panel has weakening capacitor not sending correct current flow to the heating element

Jul 09, 2009 | Dryers

1 Answer

G.E. electric dryer terminal block and wires are burnt. I took the dryer apart to clean the inside of dust and lint. I put it back together and plugged it in. The breaker tripped,and I looked at the...


you did not say how old? but I find that all it takes is one wire to get old, and starts to heat up because electric cant flow through it, then it gets worse and worse fast, then heats up the whole block, till the whole thing gets melted...bad thing is its happens slow enough that the standard 30 amp breaker won't trip during this slow melt down!

Mar 13, 2009 | Kenmore 64902 Electric Dryer

2 Answers

Kenmore Elite dryer heats but does not dry


Make sure that your vent tube is not kinked or crushed behind the dryer and it all this is ok then you need to change your cycling thermostat. is it gas or electric

Mar 12, 2009 | Kenmore Dryers

1 Answer

Kenmore Elite Electric Dryer model 110 62052100 evenheat tempcont


Thanks for your input!.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 10, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

No hot air


possible voltage issue be sure you have steady 240 at 2 outside screws on ac connection next ck timer quick ck unplug dryer remove console cover short large red and black wires together plug back in and turn on ..possible motor switch ..contacts in motor switch close as motor runs supplying one side of element with other 110 volts

Nov 27, 2008 | Kenmore Dryers

Not finding what you are looking for?
Kenmore 73952 Gas Dryer Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...