Question about Samsung LN46A650 46 in. LCD HDTV

2 Answers

Samsung Ln46A50 won't trun on

I bought the Samsung LN46A50 about 3 months ago. It's OK until last week. It suddenly shut off and won't trun back on. But it attempts to trun itself on and the red light blinks and makes 'click' sound for hours.
I unplug the power line, wait for 30 minutes, plug the power line back. It will be fine. Then the same problem will happen again. I called the customer service number and applied the firmware update they suggested. It didn't help. How can I fix it? Please help! Thanks!

Posted by on

  • ziominix Dec 09, 2008

    Same problem here. Push the power button, red light blinks and the tv goes "click click" after 15 seconds or so. Haven't been able to get it to come back on. Called customer support, they set up an appointment for a tech to come out. Only had the tv a few weeks, for such great reviews, I'm pretty let down by this.

  • Anonymous Mar 28, 2009

    Another victim. I thought it was due to the Firmware upgrade i performed on my LN46A650 (a1fxza) and BD-P2550. I, too, get the 'click click', the 5x red blinking light and its cycles every 41 seconds. Just wrote samsung an email to them. Hopefully they can shed some light on the issue.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 302 Answers

You have a bad power supply. You can get parts at

www.interliquidparts.com

Posted on Nov 26, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 98 Answers

You need to get service for replacing the main board.

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

EMERSON 55 INCH TV MODEL: LF551EM5 SERIAL: DS2A1433113216


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Jan 10, 2017 | Emerson Televison & Video

1 Answer

My samsung model# un40eh5000 has small black lines across the top5 inches of the screen. Is this a bad screen panel?


Can be. First of all try to replace the TCON board . If its work then ok. if not the panel would be faulty.
If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Jan 09, 2017 | Samsung Televison & Video

2 Answers

My samsung smart tv hdmi ports do not work anymore


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jan 09, 2017 | Samsung Televison & Video

1 Answer

LG LED TV has sound but no picture. Went out all of a sudden. Image shows with flashlight. Flashes for split second on power up and power down.


Your screens back light has most likely failed and or the voltage controller for the back light, both should be replaced.

Jan 08, 2017 | LG Televison & Video

3 Answers

LG 26LH2000 television. Last 2 days when I turned my TV on there was only sound, and black screen.


back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
26359174-wxmxxsggneevie4j1gyznoid-1-0.jpg

Nov 16, 2016 | LG 26LH2000 26 in. HDTV LED TV

1 Answer

I have a toshiba LED TV Model 40PB200, i bought it two months now. Recently, the audio in port started producing a sound as if microphone is on and the VGA for computer flickers when i connect a laptop on...


One thing is that unless it is usb you should always have the devices powered DOWN before connecting them via" wire electric data cables". it only takes 3 static volts of electricity to damage a circuit board. when you zap you buddy when you wear sox its 20 to 30,000 volts of static electricity so 3 volts would not be known let alone felt or seen. Power down and you will be well not you .

Sep 30, 2013 | Televison & Video

Not finding what you are looking for?
Samsung LN46A650 46 in. LCD HDTV Logo

573 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69845 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...