Question about Frigidaire GLTR1670A Front Load Washer

1 Answer

Frigidaire I bought a Frigidaire Model GLEQ2152ES1 Front Load Washer less than a year ago. In the past few months, there have been a few occasions where the washer sort of turns itself on, when I haven't been using it. It doesn't start the cycle or anything, but the time will flash on the display and the machine will beep, as if the cycle were about to start. Then it goes back off and repeats usually for no more than 5 minutes. Sometimes even partial numbers flash onto the screen. I am worried that this may be a sign of something getting ready to malfunction, but I can't call a service person to come look at it when I never know when it might occur. I would hate for the washer to finally break after my one year warranty expires in February 2009.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Probaly control bd problem ..call any way to get history started also may consider extended warranty from where you purchased it some other warranty company control may finally go after warranty expires and and extended one would help avoid problems getting coverage for a problem that may be present during original warranty..ever tried convincing company to repair something that was faulty to begin with??

Posted on Nov 20, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire front load dryer not drying all panel lights flashing?


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Jul 30, 2015 | Frigidaire Dryers

1 Answer

My frigidaire stopped working


The bearings are bad. My sears kenmore did the same thing. Do you have hard water, that would be one cause. Or maybe it's still under warrenty because it is not a cheap fix.

Dec 31, 2009 | Frigidaire FTF530FS Front Load Washer

1 Answer

The clothes are soaking wet after the run on the machine. It seems the spin function is not working. I have a maytag neptune model front load.


I have the same problem. I have spent about $1,400 in repairs on this damn machine since we bought it about 8 years ago. It works for a bit then something else goes wrong. This is the fourth time I've had this problem.
It's the belt, it's the motherboard, its this its that $200 a pop. Just enough to say ok, any more I'd buy a new one, then a few months later something else happens.

What happened to Maytag? My mom and grandmother both had maytags for years, decades without an issue. The new ones ****.

Nov 11, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Wire Scraping sound and sparks inside rear dryer drum area.


Probably the rear bearing has failed and caused the drum to rub against the heating element. Hey, is this the guy that said he heard a noise last month? LOL
c523f84.jpg

Feb 01, 2009 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Frigidaire ftf630as0 Front-Load Washer TUB DOESN'T WASH OR SPIN


How old is your machine? Mine was doing the same thing. After doing some research online (and a visit from a Sears technician), I found out that the bearings died on on the drum. The Sears technician told us it was a combination of the type of soap being used (non HE), and the amount of soap being used per load that contributed to the unit's failure. I wish someone had explained that to us 7 years ago when we bought the machine. Appearently there are enzymes in the soap that will eat away at the rubber washer that protects the bearings. There are less of these enzymes in HE laundry soap, thats why it's recomended for front loading machines.I think the HE soap will still eventually cause this machine to fail, but it would take a little longer than 7 years (maybe 10 or 12). By then it's probably time to by a new machine anyways. We bought a new machine because it would cost over $500 CND to get the old one fixed. We ended up with a Frigidaire Affinity (FAFW3577KN).

Jan 09, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Water Collection in Washer when Machine is OFF


you may have something lodged in the pump, pumps easily removed worth checking

Nov 17, 2008 | Whirlpool GHW9100L Front Load Washer

Not finding what you are looking for?
Frigidaire GLTR1670A Front Load Washer Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...