Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Stops and starts on warm water fill

We have a 9 year old washer ultimat care11 heavy duty super capacity plus.resource saver. When I put the water temp on warm or cold the water stream is very slow and then goes on normal for a few seconds then back to slow. When I put it on cold the water stream is always slow. We're not sure why.we are on a well,and there is a little sand. from time to time.any insight would be appreaciated.thank you the johns

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 367 Answers

Try taking the hoses off the machine and cleaning the screens in the hoses and the screens in the water valve. They get plugged and restrict the flow of water. if these are clean then the sand in your well has damaged the water valve and you must replace it. The part number is 285805 and is around 30 bucks.

Posted on Nov 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have kenmore 80 series heavy duty/ super capacity plus washer that after it fills with water,hot or cold and it starts the wash cycle, I noticed that the agitator only moves once in awhile and stops


hum either a bad timer sticking the point contacts close. have u tried this in all cycles? and possibly a motor with bad windings not enough power to run agitation? try running in mild or gentle and see what happens? I was tempted to say the cam dogs in agitator but they dont work then stop then work, when they go out they go out.

Feb 17, 2015 | Kenmore Washing Machines

1 Answer

Heavy duty super capacity plus


You dont. If it is making noise drum bearings or idler needs replaced

Nov 03, 2013 | Kenmore 24032\24036 Top Load Washer

1 Answer

Heavy duty super capacity plus


Check water level switch and associated hose, see my other posts on this solution.

Aug 19, 2013 | Admiral AW22 Top Load Washer

3 Answers

I have a Whirlpool Heavy Duty-Super Capacity Plus, 7cycle/2 speed. Model LSR7200EQO , the agitator stopped working


My whirlpool heavy duty 2 speed 7 cycle washer machine stopped working, It fills up and aggitates for the first cycle then when it should drain and spin it doesnt drain nor spin

Jun 05, 2010 | Whirlpool LSB6200KQ Top Load Washer

1 Answer

Fill Cycle Won't Stop


heres hteaprt numbr for both the water level switch and the connecting tube, before i replace he switch make sure the tube is connected to rear of tub nad isnot cracked or kinked, and connected correctly to the switch for that matter. a hole in the tube would hamper he switches ability to sense when unit is full

3356466 water level switch,3347780 pressure switch tube

Mar 16, 2008 | Whirlpool LSQ9030P Top Load Washer

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...