Question about Canon PIXMA MP150 All-In-One InkJet Printer

Can you please help to solve the error.

5100 error is a carriage error. Could be caused by the carriage unit, timing strip, logic board or carriage motor. Check that nothing is obstructing the carriage from moving freely and that the clear timing strip is ok.

Posted on Nov 22, 2008

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

Do you want combinations or permutations? They're different things. A combination of n items taken m at a time, sometimes written "nCm", selects m items from a group of n without regard to order. A permutation of n items taken m at a time, sometimes written "nPm", selects m items from a group of m with regard to order.

Given six numbers, there are six combinations of one number, 15 combinations of two numbers, 20 combinations of three numbers, 15 combinations of four numbers, six combinations of five numbers, and one combination of six numbers.

Given six numbers, there are six permutations of one number, 30 permutations of two numbers, 120 permutations of three numbers, 360 permutations of four numbers, 720 permutations of five numbers, and 720 permutations of six numbers.

Given six numbers, there are six combinations of one number, 15 combinations of two numbers, 20 combinations of three numbers, 15 combinations of four numbers, six combinations of five numbers, and one combination of six numbers.

Given six numbers, there are six permutations of one number, 30 permutations of two numbers, 120 permutations of three numbers, 360 permutations of four numbers, 720 permutations of five numbers, and 720 permutations of six numbers.

Oct 22, 2014 | Office Equipment & Supplies

Hello Heather ,

Keep in mind that 1 cm is 1 /100 of a meter

1 centimeter = 0.393700787 inches

so

140 centimeters = 55.1181102 inches

Keep in mind that 1 cm is 1 /100 of a meter

1 centimeter = 0.393700787 inches

so

140 centimeters = 55.1181102 inches

Jun 20, 2014 | Office Equipment & Supplies

What is your math problem ?

Mar 05, 2014 | Office Equipment & Supplies

first of all change or re-install the scanner's driver

Feb 01, 2014 | Office Equipment & Supplies

x=.25061047

or

x= 1/(4*cos(4))

or

x= 1/(4*cos(4))

Oct 22, 2013 | Office Equipment & Supplies

With algebra you are learning problem solving-that is the process of problem solving using rules and equations. The best way to learn it is to shut out all distraction and work at it. If there is something you don't understand you may have to go back to the beginning and learn all the principals and rules that you don't understand- Algebra can be a very hard subject but it can be concord with persistence.

Sep 28, 2013 | Office Equipment & Supplies

if you mean {7(2)2+[(3-2)-4x(3)]2} or 7(2)2+[(3-2)-4x(3)]2

{28+[(1)-12]2}

{28+[-12]2}

{28+-24}

=4

or if it was 4x not 4 times

{7(2)2+[(3-2)-4x(3)]2}

28+[(1)-12x]2

28+-24x

=-28x+28

{28+[(1)-12]2}

{28+[-12]2}

{28+-24}

=4

or if it was 4x not 4 times

{7(2)2+[(3-2)-4x(3)]2}

28+[(1)-12x]2

28+-24x

=-28x+28

Jun 12, 2013 | Office Equipment & Supplies

The circumference of a circle is C=2 * pi * r or C= pi * d.

What do we know? C=47.1 and pi.

What are we trying to calculate? d

Put what we know in the equation and solve for d.

47.1 = pi * d

To isolate d, we have to divide both sides by pi.

47.1

------ = d

pi

I get 14.99' or approximately 15' as the diameter.

Good luck,

Paul

What do we know? C=47.1 and pi.

What are we trying to calculate? d

Put what we know in the equation and solve for d.

47.1 = pi * d

To isolate d, we have to divide both sides by pi.

47.1

------ = d

pi

I get 14.99' or approximately 15' as the diameter.

Good luck,

Paul

Apr 17, 2013 | Office Equipment & Supplies

How does the bulb look? Is it bright or kind of dim. The bulb warming error is designed to halt use of the machine until the scanner bulb reaches the correct output level. As these are basically a flourescent tube, they will dim over time and at a certain point they will not generate enough light to enable proper scanning. If the bulb is dim, it will require replacement.

Mar 14, 2011 | Office Equipment & Supplies

Using the 1515 as a fax machine is a pretty simple procedure if everything works right. All you have to do is hook a working phone line up to the phone jack on the back of the copier (the one labeled LINE, not TEL).

Why won't the fax work? If it is giving you an error message, what is the message?

If you are not getting a dial tone when faxing, unplug the fax from the phone line and plug a working phone in, and see if the phone gets a dial tone. If it doesn't, there is a problem with your phone line.

You can also try plugging the fax machine into another phone line. If the fax works on that line, then there may be a problem with the first line.

Are you having problems sending faxes or receiving them, or both?

Why won't the fax work? If it is giving you an error message, what is the message?

If you are not getting a dial tone when faxing, unplug the fax from the phone line and plug a working phone in, and see if the phone gets a dial tone. If it doesn't, there is a problem with your phone line.

You can also try plugging the fax machine into another phone line. If the fax works on that line, then there may be a problem with the first line.

Are you having problems sending faxes or receiving them, or both?

Jan 05, 2010 | Office Equipment & Supplies

Jul 16, 2014 | Canon PIXMA MP150 All-In-One InkJet...

1,816 people viewed this question

Usually answered in minutes!

the printer is not working

and it shows tha i have error number 5100

service error 5100..how to solve this

my Cannon lpb 5100 colours are out of allignment (black OK) - error is "out of Register colours correction" NOt sure how to solve this problem - calibration does not work?

×