Question about Hotpoint WMA35 Front Load Washer

2 Answers

On a hotpoint aqualtis aqxx149pm i get error code f8 flashing

What does the code f8 mean and how can it be fixed

Posted by on

  • haylsdgm Nov 23, 2008

    have had a new element-total cost £68.00 and so far so good, touch wood, washer is working fine.

  • rosthacker
    rosthacker Oct 01, 2012

    can any one tell me waht error code f6 is on aqualtis washer

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 3,463 Answers

Hi.
F8 means that heater relay cannot be activated, you need to call an engineer.
Could be expensive, possibly a new control board needed

Posted on Nov 20, 2008

  • Barry Coates
    Barry Coates Nov 23, 2008

    Hi. Glad to hear you sorted problem out, at least I pointed you in the right direction

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hiya my hotpoint aqualtis is flashing f8 what does that mean please

Posted on Jan 22, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hotpoint Aqualtis has an f6 code displaying.. Any ideas on what the problem is and how to fix please?


Hi!

F6 means:
- Broken buttons;
- A faulty electrician between the control board and the controller;
- Faulty electronic module

Mar 05, 2017 | Hotpoint Washing Machines

1 Answer

Aqualtis washing machine has error code F01 what does this mean?


F01 Electronic circuit board fault
Issue: Washing machine is not operating - some or all functions are not selectable.
Advice: We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply and wait 30 seconds and try starting the machine again.

Jan 14, 2016 | Hotpoint Aqualtis AQXXL129PM Washer Front...

2 Answers

Hotpoint aqualtis aqgd169s no power wont turn on not even had an error code come up


If the machine is dead, I would check the cable from the main boad leading to the front display on the door. Often the cableharness breaks at the hinge. (one of cables). If that is not the case, eather the main board or display board is dead.

May 26, 2014 | Hotpoint Ariston AW125 Front Load Washer

1 Answer

Hotpoint aqualtis error code F04


Hi from retired Englishman in SW France,

Indesit (Hotpoint Aqualtis, Ariston) 'F04' states 'pressure switch jammed empty, check pressure switch, wiring and module connections'.
It is not that unusual to find it cured by having the connections gently pulled apart and replaced, thus 'cleaning' the contacts back to correct operation ;-0)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck,
John C

Oct 05, 2011 | Washing Machines

1 Answer

Hotpoint aqualtis giving H20 error, looks like fill problem, but cannot see anything stopping the water flowing into the machine.


i have hotpoint aqualtis, it washes & empties but then starts flashing when ready to rinse. any suggestions?

Dec 04, 2009 | Washing Machines

3 Answers

Trouble shooting the hotpoint aqualtis aqxxf149pi flashing f08


my hotpint aqualtis aqxxf149pi make a funny grinding noise when it spins help please?

Jun 25, 2009 | Hotpoint Washing Machines

1 Answer

It keeps flashing f10 and now started to flash f8 aswell what dose this mean and how do i sort it ?


Could you please tell what kind of dryer it is.Else here is a link that has all hotpoint error codes.Choose your model from the list and the error and post your comments so that i can further guide you to eliminate the error.

click here for hotpoint error codes

Please do rate my solution.Good luck with the machine.

Apr 11, 2009 | Hotpoint Dryers

1 Answer

A hotpoint aqualtis aqxx149pm spinning loudly


Hi, This is a common problem with the hotpoint range. It will be the main wash bearings that have failed and need replacing. This is a very easy process but is quite time consuming. Remember tho change everything that is; Bearings, and bearing spider and front tub seal as you dont want to have to do it again in a short time or have leaks coming from the front.
Good luck and get back to me if you need any further help....................

Jan 02, 2009 | Washing Machines

Not finding what you are looking for?
Hotpoint WMA35 Front Load Washer Logo

1,819 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...