Question about Konica Minolta Office Equipment & Supplies

1 Answer

I have just purchased a 4650EN Magicolor printer Aand want to know how to set it to work on a home network

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

Does the printer have an ethernet port? If so, just cable it into the network hub / switch. If you use a private network, and the printer was previously used, in a private or public network, then you will likely have to reset the static IP address of the printer. If the printer is new, then it may get an IP address from your DHCP Server. At some point, I recommend you give the printer a static IP address within your IP range, but outside the normal assignment range of the DHCP server to prevent conflicts.

If not, you can connect it via a parallel port to one of the computer systems currently on the network, and then set it as a shared device.

Posted on Nov 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my magicolor 4650en showing service call c025


Konica Minolta Magicolor 4650EN Error Codes


Code

C025

Display

CONTROLLER ROM

Description

Controller ROM error (Configuration information error)
• Lead error of destination setting file is detected during the printer starting.

Remedy

1 Reboot the main body. 2 Check the PRCB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PRCB.

Feb 16, 2018 | Office Equipment & Supplies

1 Answer

How do i clear service call c025


check you main board all connector bent pin? did you attempt a firmware update? if so reflash. worse case bad main board

Jul 22, 2017 | Konica Office Equipment & Supplies

1 Answer

Konica minolta magicolor 4690 mf won't print after changing network setting


I would recheck the network setting first why where they changed???

Jan 30, 2014 | Konica Minolta Magicolor 4690MF...

1 Answer

We got all new ink cartridges for our printer but it keeps saying that the toner is low and won't print. We shook them all like it said but we can't figure it out. Hopefully you can help us...


First of all, this printer is not inkjet, is a laser printer. It has toner cartridges, not ink. Was the cartridges you changed, originaly? Every cartridge has a chip and the printer recognize them being originaly. If the cartridges are not originaly or compatible, the printer doesn't recognize them and can't read the chip to reset the message " replace cartridges" and doesn't print anything.

Mar 08, 2011 | Konica Minolta MAGICOLOR 4650EN 24 ppm ...

1 Answer

Konica Magicolor 2490MF network settings


service call 05H on the panel,lights keep on blinking, printer does not function

Jul 05, 2009 | Minolta magicolor 2400W Laser Printer

1 Answer

Language settings


u know your network printer ip addrese .
if u know then clik on this link
http://"printer ip addres"

for example..
htp://192.168.15.90
then u se languages in settings.
set english

Nov 27, 2008 | Konica Minolta magicolor 2400 Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6696 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Ben
Ben

Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...