Question about Yamaha RX-V3800 Receiver

Open Question

Rs-232 codes for rx-v3800

I have downloaded the codes for this unit and am very confused i need to see just what some complete codes look like for basic control( Vol, Pwr, Source

Posted by on

4 Suggested Answers

  • 2 Answers

SOURCE: No sound when using Panny plasma with RX-V3800

Let me see if I understand. You have one HDMI cable linking your TV and AVR? This is only to send video and sound out to your TV from the AVR you will not be able to send sound back over this same cable. You'll have to use the TVs audio out and connect it to an input of the AVR. The "HDMI out" on the AVR is just that Out and not In. For more questions I'd recommend checking out the RX-V3800 RX-V1800 thread over on AVSforum.com

Posted on Aug 10, 2008

woodzowl307
  • 533 Answers

SOURCE: MY RECEIVER YAMAHA RX-V3800 HAS AN ERROR WHEN I

Happy Birthday to you..............Problem Solved..........

Posted on Apr 12, 2010

gokomets
  • 120 Answers

SOURCE: how do i connect my yamaha cx-1 preamplifier to my

Not sure what for but through the tape monitor jacks I think unless you have pre/main jacks. Why another preamp when the receiver already has one?

Posted on Apr 14, 2010

  • 53 Answers

SOURCE: Yamaha Receiver RX-V3800 Rear Left surround click sound

It's possible it is some sort of interference pickup, but another possible I've come across a number of times on Yamahas is poor earth connections via the back panel.

All the circuit boards have earth connections on them and the screws holding them to the back panel form an earth bonding connection. Tighten all the screws on the back to eliminate this possibility. Costs nothing to try and may just solve it.

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi receiver is having intermittent problems with power up & off. at the moment it would only turn on once in 5 times i try to turn on. At one stage it would turn off but then back on again within five...


I got Yamaha RX-V3800 with intermittent power.
Cause by capacitor C4 22nF 630V on the control power board.
After replacing the capacitor, receiver again working OK!

Feb 13, 2011 | Yamaha RX-V3800 Receiver

1 Answer

Yamaha Receiver RX-V3800 Rear Left surround click sound


It's possible it is some sort of interference pickup, but another possible I've come across a number of times on Yamahas is poor earth connections via the back panel.

All the circuit boards have earth connections on them and the screws holding them to the back panel form an earth bonding connection. Tighten all the screws on the back to eliminate this possibility. Costs nothing to try and may just solve it.

Jul 19, 2010 | Yamaha RX-V3800 Receiver

1 Answer

How do i connect my yamaha cx-1 preamplifier to my yamaha rx-v3800 av receiver


Not sure what for but through the tape monitor jacks I think unless you have pre/main jacks. Why another preamp when the receiver already has one?

Apr 14, 2010 | Yamaha RX-V3800 Receiver

1 Answer

MY RECEIVER YAMAHA RX-V3800 HAS AN ERROR WHEN I


Happy Birthday to you..............Problem Solved..........

Apr 11, 2010 | Yamaha RX-V596 Receiver

1 Answer

Yamaha RX-V3800 receiver zone two audio problems


To get audio with this set up also hooked up analog audio RCA cables for the audio for each piece of equipment for 2 channel out put. Zone 2 will not out put a digital signal and this receiver will not down convert a audio signals to analog if using digital audio hook-ups.

Mar 15, 2009 | Yamaha RX-V3800 Receiver

1 Answer

No sound when using Panny plasma with RX-V3800


Let me see if I understand. You have one HDMI cable linking your TV and AVR? This is only to send video and sound out to your TV from the AVR you will not be able to send sound back over this same cable. You'll have to use the TVs audio out and connect it to an input of the AVR. The "HDMI out" on the AVR is just that Out and not In. For more questions I'd recommend checking out the RX-V3800 RX-V1800 thread over on AVSforum.com

Aug 10, 2008 | Yamaha RX-V3800 Receiver

1 Answer

Remote do not want to accept satellite tuner code


You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

Jul 22, 2008 | Yamaha RX-V3800 Receiver

Not finding what you are looking for?
Yamaha RX-V3800 Receiver Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio & Video Receivers Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

jonpoint

Level 1 Expert

4 Answers

Are you a Yamaha Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...