Question about Zyxel P-334WT (P334WT) Firewall

1 Answer

Router Not Working

Hi, I have a Zyxel P334WT router that was setup and working at my home. I was having trouble with the modem always disconnecting so went to the Roadrunner company and got a new modem. Now that I setup the new modem to my main computer, the internet only works with the modem directly connected to my computer. When I hook everything up to the router like it was before. Nothing seems to work. I tried to unplug everything and let it restart but that didn't work. Could you please help me to get the wireless working again?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 63 Answers
Re: Router Not Working

First of all Reset by pressing a reset button or with the help of a pen. turn if off and restart ur computer Once you connect ur computer with router.. go to start-run- type ipconfig. if you are getting an ip address in range of to, 1.Launch your web browser(IE). Enter ? as the web site address. 2.The default password (?1234?) in internet access setup choose "Encapsulation as ethernet and there should be nothing in username or password.incase you have been provided with username and password from ur ISP then enter those with ip address assignment setting as dynamic. See if you can open the routers settings page. once you open it follow the instructions given on this link in .PDF format to SETUP ur router for ur internet connection. To learn about ur router n setup more visit: I am also using the same router and i did the same thing with the help of *** support team. i got it fixed in just 15 minutes. u can contact them on *** Just try it out and let me know or call *** team. i am sure they will help you out. Cheers!!

Posted on Jan 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to install wireless router on windows 7

D-Link routers use the connection from your Internet service provider to create a wireless network for the various Wi-Fi-enabled devices in your home or office.

Once the router is installed, you can truly enjoy the portable capabilities of your laptop or other wireless device.

D-Link routers have a straightforward installation process, despite the advanced technology behind wireless equipment.

So there is no reason to wait around for a technician to help you install your wireless equipment.

Remove the cable that is attached to the "Internet" port on the rear of your DSL or cable modem.

Plug the Ethernet cable into the "Internet" port on the modem and plug the other end of the cable into the "Internet" port on the rear of the D-Link router.

Attach the power adapter to the port on the rear of the router and plug the adapter's cord into a outlet.

Remove the power cord from your modem and wait 10 seconds before plugging it back in. This will reinitialize your modem and force it to establish a connection to the D-Link router.

Your router will immediately begin distributing a wireless network with the "D-Link" network name.

Connect your computer to one of Ethernet ports on the rear of the router and open a Web browser.

Type "" into the address bar and press "Enter." Enter "admin" into the username field and type "admin" again into the password field.

Click "OK" to open the wireless configuration page.

Click "Wireless Security Setup Wizard" to create a wireless password for your router's network. Click "Apply" to save the changes to the router's settings.

hope this helps

Oct 10, 2012 | D-Link DIR-615 Wireless N 300 Router with...

1 Answer

Linksys password

Before doing a hard reset on the router you may want to try the default username and password. While this is not the same for all routers, this may allow you access to your router.

Username: Admin or Administrator
Password: <Blank>, try just pressing enter or try "admin" as the password as well.

If this does not work and you believe the router is using the default username and passwords try viewing the default settings at
Resetting your router

If the default username and password doesn't work it's likely you or someone whose setup your router has enabled a password that has been forgotten. Thankfully most routers will have a small pinhole button on the back or bottom of the router (like that shown in the picture to the right), pressing this button in and holding on this button for 10-15 seconds will hard reset the router. After this has been done setup the router again and enter a username and password that you can write down.
hope this helps

Jun 07, 2012 | Linksys WRT120N Wireless-N Home Router,...

1 Answer

Hello. It appears my router is blocking VPN access to the office server. I can connect using the ethernet cable so have isolated the problem to the router firewall. How do I get around this? Thanks

I will make a couple of assumptions on you setup. First, you have some type of highspeed internet. You have a retail type router/firewall plugged into your internet modem. You are using a VPN Client software installed on a PC or Laptop. By stating that when you connected using your Ethernet cable, you were plugged directly into the Internet modem.

Basically, what you have here is a configuration issue with your Router/Firewall. I use the Cisco VPN Client Software from home. This software uses UDP over TCP port 10000. Your VPN Client will use something along this line as well. So, you need to do one of two things here. Determine what Protocol and Port your VPN software uses. Login into you Router/Firewall and add that to your outbound allowed traffic. Or login into your Router/Firewall and configure it to allow all outbound traffic.

If you are not sure how to do this, the documentation that came with your Router should contain a Tech Support number to call. They can walk you through this in short order. Otherwise, post your EXACT make and model of your Router/Firewall and I will try to get the information for you.

Hope this helps.

Jun 30, 2010 | Linksys Network Security & Firewall...

1 Answer

LB2 with 1 computer 2 modems.

look wich modem is online and connect arouter to it with broadband before doing all this unplugged the modem and run ainternet cable called cat 5 from modem to router install cd after that restart pc and plugged modem and router back in outlet

Aug 05, 2009 | HotBrick SoHo LB-2 (LB2) Firewall

1 Answer

Ive lost the setup cd for my zyxel p-334wt


U must prepare ghost for the software. Which there is a ghost software will be available on this link

This software is installed after that u have get a copy of software in your system. It means u can installed the software (zyxel p-334wt) to other systems. Simply means the software is backup by ghost software without the setup files. And to be installed in other systems also. ok

good luck

Don't forget to rate the solution

Jun 17, 2008 | Zyxel P-334WT (P334WT) Firewall

1 Answer



First, go to ur Router Configuration Page. There are 2 pg into related WireLess Configuration Settings. So u find ur problem into the WPA security configuration is under the wlan Security section, and then you select WPA PSK (Pre Shared Key) and TKIP encryption for Lan security. As well as changing the WPA Mode to enabled, u will need to enter a WPA Pre-Shared Key. So u found, which is a Network key and why to need.


Oct 22, 2007 | Zyxel P-334WT (P334WT) Firewall

1 Answer

Cannot connected to my router

once u went to teh remote login u can see port and u need to change it to 8080 and reboot the router and try

Oct 08, 2007 | Zyxel P-334WT (P334WT) Firewall

2 Answers

Not working with Vista

May the router is not compatible with vista. Just try to use it with xp.

Aug 23, 2007 | Zyxel P-334WT (P334WT) Firewall

1 Answer

P-334WT Router Freezing

Your first step is to upgrade the firmware. OR re-install the firmware. Do you mean freezing like, lights lock up and stay on regardless of the activity? Which that would point to firmware. Or do you mean that your internet just cuts out? Which I would look more towards your computers browser, possible background applications or even the NIC.

Jun 14, 2007 | Zyxel P-334WT (P334WT) Firewall

Not finding what you are looking for?
Zyxel P-334WT (P334WT) Firewall Logo

Related Topics:

773 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zyxel Network Security & Firewall Devices Experts


Level 2 Expert

567 Answers

john smith

Level 2 Expert

366 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a Zyxel Network Security and Firewall Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides