My iRiver H10 5GB works fine, except when I choose a song to play, it plays the song, but i can not hear anything through the headphones, i have tried 4 different pairs and nothing works...can someone help me?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it always works with headphone - without fail - then it is likely the fault is within the headphone socket. You'll appreciate that when you plug in headphone, the speakers in the laptop are cut off - which is a mechanical break in connection caused by the plug. Sadly, it sounds like it is staying disconnected.
i have a 30 gb hd in mine, plus i upgraded the battery..............but in your case can i suggest www.rockbox.org ............boot up in 30 sec or less, pitch control, you can customize your sound to your like... (bass,highs or etc)
i've recentlly had the same thing but mine fixes itself immediately after scrambling for 2 secs...
in your case though, if its just 1 song it could be the song codec. if otherwise then either try differnet headphones or maybe open it up and see if the headphone interface still works.
hi there, open iriver again and take new drive out (reinstall hard drive, just an adjustment process). close it up and try to download / play a file.
now if this process dont work, save iriver software to pc and format the hard drive (this will erase the hard drive songs and all)..now reinstall the software from the pc...download your songs back to iriver and you should have a brand new Iriver ihp-140............if heplful feel free to rate
If you have a song up just click and hold to the right and a bunch of options should show up. The first option should be "play mode" and in there you can choose whether your playlist (or album, depending on how to navigated to the song) will shuffle and repeat.
if you are using ROCBOX go to settings./ play back settings..enable party mode/replaygain/crossfade...its playing like all intros......if this is straight iriver firmware you can try settings and look in playback setting also