Question about Cambridge Soundworks Movie Works 108 Computer Speakers

Open Question

Hi there.i have got a cambridge soundworks dtt2200

All the speakers worked at won time .but now there is only two working.i have cheqed all the speakers in one of the ports and all the speakers seem to be working.could you help me please.stuart

Posted by on

3 Suggested Answers

Open SKy
  • 618 Answers

SOURCE: Fluctuation in sound output on Cambridge Soundworks 5.1 speakers

Hi Paulus
A lot brand of speakers, like Sound Blasters, Logitech, Cambridge, has this (strange) kind of volume problem, sometimes, is the resistor, in the volume control, sometimes in the modulator for the board on the sound speakers, Subwofer.
I use a general tip is let the volume in one setting and don't move in the intermediate low volume say....9 .
from other thing, be change the speakers.

Posted on Nov 26, 2007

Open SKy
  • 618 Answers

SOURCE: cambridge soundworks speakers

Happy Holidays Fredonna
Well, easy task, just put a music CD, on system and if you got an headphones, put in the green connector on your sound card, pop up the PC volume, and see if you heard sound, if you do, heard sound then the problem is your speakers. if don't is your sound card.
good luck

Posted on Dec 26, 2007

SOURCE: re: OZAKI SPEAKER INSTALLER

hmmp?..i dnt know what to do to our speaker?!because our had been reformat

Posted on Jun 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need circuit diagram for Cambridge Soundwork Slim 500 model. Where I can find it?


    Cambridge Soundworks circuit diagram cambridge audio a1 ...

    www.fixya.com > ... > Tags > circuit diagram cambridge audio a1 mk3
    Ask your Cambridge Soundworks circuit diagram cambridge audio a1 mk3 questions. Get free help, advice & support from top Cambridge Soundworks experts. images for circuit diagram for Cambridge Soundwork

Jan 05, 2016 | Audio Players & Recorders

1 Answer

Replacement part or schematic for Cambridge Soundworks computer speakers


I'm in the same predicament! I found this - it seems close, though the pins seem to be spaced closer together, but it looks like they might be bent to fit the wider PC board spacing. The rotating shaft also seems smaller - the original is larger than 1/4".
What do you think?

Jan 04, 2013 | Cambridge Soundworks SWBE SoundWorks PC...

1 Answer

Woofer has popping noise


I have the same problem with my Cambridge Soundworks CSW250. Also one of the speakers doesn't work all the time. I'm sure it's a loose connection on the circuit board. When I tap the subwoofer near the connections, the popping noise changes (gets worse, better, other speaker works,etc.).I tried taking the subwoofer apart, but the area near the connections is sealed with glue, so I cannot access it. I hate it because when it works,it sounds so good. Anyone know how to get just the circuit board and back panel?

Aug 09, 2012 | Cambridge Soundworks Audio Players &...

1 Answer

I have used the sound test to check my CS 5.1 system. When I test the subwoofers, there is no sound. I have played CDs with deep bass, no sound is emitted from the subwoofers. I have T-500...


One step at a time. Get the subwoofer to work, THEN play music through it.

You don't describe the electronics, IF you have a sub defined, whatever other steps it probably needs to pass LFE to the sub.

Register and download the manual for free at retrevo.com

Page 7

http://www.retrevo.com/support/Cambridge-Soundworks-T500-Speakers-manual/id/522bh631/t/2/

Apr 29, 2011 | Cambridge Soundworks Newton Series T500...

1 Answer

Lost Speaker Sound


It does sound like a connector issue, don't you think?

What happens if you DON"T touch the connector but move the volume control on the controller?

Have you tried looking outward toward the source?

Mar 30, 2010 | Cambridge Soundworks P200 Subwoofer

1 Answer

No volume


do they plug in with a 3.5mm audio jack?
if so, i think you need to check your drivers for laptop output socket.
have you tried output with any headphones etc? do they work on laptop?

Feb 25, 2009 | Cambridge Soundworks SWBL SoundWorks PC...

1 Answer

Hi. I cannot setup the Cambridge Soundworks DTT2500


What is the exact problem you are facing?

Thanks
Kevin

Jan 31, 2009 | Cambridge Soundworks CSW DeskTopTheater...

1 Answer

Fluctuation in sound output on Cambridge Soundworks 5.1 speakers


Hi Paulus
A lot brand of speakers, like Sound Blasters, Logitech, Cambridge, has this (strange) kind of volume problem, sometimes, is the resistor, in the volume control, sometimes in the modulator for the board on the sound speakers, Subwofer.
I use a general tip is let the volume in one setting and don't move in the intermediate low volume say....9 .
from other thing, be change the speakers.

Nov 25, 2007 | Cambridge Soundworks Movie Works 108...

2 Answers

Speakers working, then suddenly not...


It's possible they've died, have you checked that your sound card and drivers are working by using another set of speakers or headphones.

Dec 31, 2006 | Cambridge Soundworks C1MWBWEE Computer...

Not finding what you are looking for?
Cambridge Soundworks Movie Works 108 Computer Speakers Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cambridge Soundworks Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

618 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

 Grubhead
Grubhead

Level 3 Expert

4872 Answers

Are you a Cambridge Soundworks Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...