Connecting TLWR743ND to BT hub

1. A TV aerial feed - The BT Vision box gets its digital TV signals over-the-air, so needs a TV aerial. This needs to be connected to the aerial input socket on the V-Box. There is an output RF aerial socket to allow you to connect an aerial feed to a TV if required.
2. SCART lead - You need to make a connection from the Vision+ box to the TV using a SCART lead. If you have a HD TV set, you can also connect via an HDMI lead (not supplied).
3. Connection to Broadband - You'll need to connect from the BT Vision+ box to a BT Broadband connection. This is done using the BT Home Hub. The Home Hub is the Broadband router supplied by BT, and it connects into to your phone line to give you Internet access-The most common way to make the connection, is to connect an Ethernet (networking) cable from the BT Vision+ box to one of the Ethernet ports on the Home Hub. If you can't make a direct connecting to the Home Hub, you can use powerline adapters to make the connection. The self-install kit includes two Powerline adapters to allow you to connect to the Home Hub if it's in a different room to the BT Vision+ Box.
4. The BT Vision v-box has an additional scart socket, which can be connected to a video or dvd recorder.

Help with Windows 8 1 Help BT com Help


You don't say if you are trying to connect via Ethernet or wifi so I have given you the full BT help page

This page will show you where the default password is for all the BT Hubs. Where to find admin password BT Home Hub Help BT com Help If you need to reset the device as the password has been changed then look here How do reset my BT Home Hub to its factory settings Help BT com Help This will change the passwords to what are written on the BT Hub.

If it's connected to your wi-fi connection and it's not working then there's something wrong with the BT hub if it's not connected to the wi-fi then it has to be a problem with that , try unplugging it and leave it for 5 mins and plug it back in and try it then . that usually works for me Hope this helps.

The hub is your problem. They don't hardly use hubs anymore. Just use the wireless router itself.

have you typed the key exactly? viz uppercase/lowercase. The switch(hub) might have MAC address filtering on. also check if the switch(hub) has a DHCP running, which allocates IP addresses, if not you need to set your wireless connections IP address within the same range as the switch. If all else fails attempt to connect the switch via a utp network cable which should have been suplied with the switch(hub) so you can access the switch and make the necessary changes... email me on [email protected] should you need more info.

Well first of let me knwo, How are you trying to connect to the BT home hup, Are you trying to make a wired connection or wireless

And the third thing you need to check if you have the drivers for your Lan card or not?

wths the color of the hub u have is it while or black one with the blue lights
if u forgot the passphrase at the side u ll have reset to default button will b there press for 15secs and wait for it to reboot and at the back u ll have the wireless key u can use it or the passpharase at the hub can be used, and if u want to change u can go to the routers page and u can change it manually
for further assistance pls gemme back with the error code and version of the hub if not the lights on the hub for the furhter assistance

Try this link http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=27873&s_cid=con_FURL_gettingsetup/interference#tab4
I had the same problem. I tried everything I could think of but this is what eventually fixed my problem.
Hope it works for you

Yes, you are able to connect your 360 using a hardwired connection. In fact, it is even faster that way!

Your BT Home Hub has two ethernet jacks on it, for use with whatever devices you wish to connect to the internet (in this case, your 360). Simply plug your 360's ethernet cable into the jack, and voila! You can now access Live. However, if you wish to host games over live, you may need to open up certain ports for Live to use.

The ports are listed at: http://support.microsoft.com/kb/908874

A manual for using and setting up your BT Home Hub is at:
http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=16536
Near the bottom of the page is a link for the PDF version of the manual.