Question about HP Printers & Copiers

2 Answers

How to replace fuser unit on Hp laserjet 4200dtn

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

ICT339, first you unplug the printer.
-Turn the printer around so that the back of the machine is facing you.
-Remove the back door. This door has hinges on the left and right that go into the printer. with a flat head screw driver gently remove the right hinge first by setting the screw driver just behind the hinge and pry the screw driver head to the left as you push it forward.
Once the back door has been removed the fuser is right in front of you. The fuser has two blue tabs, one on each side.
-Set both hands on the fuser with your thumb pushing the tabs up while your index adds support above them. Slide the fuser out.
* When reinstalling make sure you hear the a click on each side since the clips need to lock.

Posted on Nov 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,463 Answers

1 Suggested Answer

SOURCE: hp laserjet p2055dn Replace fuser unit

That is a job by it self. If you don't want to damage your printer, I'd suggest you take it to an HP dealer pay some money and get it first checked and if so be the case that it has to change, let them change it.

Posted on Aug 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP LaserJet 4200 F2 Fuse Blown


Replace the power supply. Sorry.

Jan 09, 2013 | HP LaserJet 4200dtn Printer

1 Answer

Printer keep says replace fuser kit


These is a part on the fuser called a fusable link that blows the first power up cycle and resets the replace fuser message. It sounds like the fuser you installed is a remanufactured unit that was not professionally rebuilt. Contact the place of purchase and get a replacement. The message can only be reset with the fusable link on the fuser.

Feb 13, 2012 | HP LaserJet 4700 Printer

1 Answer

HP LASERJET 4200DTN IS CRUMPLING MY PAGES AND THE INK IS SMEARING DOWN THE LEFT HAND SIDE OF THE PAGE


hi

it sounds like the fuser needs replacing and the rollers need replacing

by maintenance kit , HP p/n Q2429A
if you are in Toronto, call Motion Technology Solutions, 905 266 9884, ak for Frank

Apr 18, 2011 | HP LaserJet 4200dtn Printer

1 Answer

How do you print double sided with the HP LaserJet 4200dtn?


if the machine has a duplexer, it will print both sides

Jan 14, 2011 | HP LaserJet 4200dtn Printer

1 Answer

Sir, We have a hp laserjet 4250n printer since


Replace the fuser unit (they last about 75K pages in my experience)

1. Power down the printer and unplug it
2. Remove the fuser from the back side of the printer
3. Replace the fuser unit with a new one
4. Turn the printer back on

Dec 24, 2009 | HP LaserJet 4250n Printer

1 Answer

Hp laserjet p2055dn Replace fuser unit


That is a job by it self. If you don't want to damage your printer, I'd suggest you take it to an HP dealer pay some money and get it first checked and if so be the case that it has to change, let them change it.

Aug 12, 2009 | HP P2055DN LaserJet Monochrome Printer

1 Answer

HP Laserjet 5m, appear error code 50...please help.


Error 50 will be a faulty fuser unit or DC controller board. Try replacing the fuser unit.

May 20, 2009 | HP LaserJet 4m plus Printer

1 Answer

Fuser


You will only need the fuser unit. It is a little complicated but here it is. You need to remove all the covers, the several screws and a bracket. Here are some good directions.
http://www.feedroller.com/Store/Service%20Manual/LASERJET%201150,%201300%20Service%20Manual.pdf

Jan 22, 2008 | HP LaserJet 1300 Printer

3 Answers

Printer HP ColorLaserJet displays Fuser Error


My HP Color Laserjet 2600n Printer is giving me error as

" 50.2 Fuser error " . then every time i have to reatart my printer.
please give me suggestion.

thanks and regards.

ajinmumbai

Dec 05, 2007 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

889 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96738 Answers

k24674

Level 3 Expert

7993 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...