Dear all when i connect my T.Sonic 840 to the computer having windows xp operating system it says that "USB drive not recognized" and one of the USB devises attached to the computer has malfunctioned, and windows does not recognize it"
I had this problem. The T.sonic supplied USB cable was faulty and when I used a quality cable the problem was resolved. If you have a USB cable that came with a digital camera it will do the job as well.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here is the Procedure for Connecting External Drives to Computer.Several brands of computer does not recognise external drives when connected to USB expansion slots,and Slots of front panel,So connect your Ext HDD to back side onboard Slots.Because there is a lack off USB power surge voltage to detect a large capacity exteral drives.Some time it is does not recognise by many computers,when USB power surge voltage is low.
I think it helps,
If you find any difficulty post a feed back we were happy to assist you
In most cases, the driver for a printer is supplied when you purchase it. It is the responsibility of the manufacturer to provide the driver along with the device to make sure the working. However, most of the Operating Systems come with native driver support for many known printers. This is the fact we have to take care while purchasing a printer. Even though we misplaced the driver disc, if we purchase a good manufacturer printer, there is a chance to get the native support from Operating System itself. There are some scenarios where printer may not be recognized by the Operating System due to some conflict with other devices. Please follow the troubleshooting steps and check the operation:
Ensure that the supplied USB cable is firmly connected to both the printer and computer side.
Ensure that the USB driver for the printer has been properly installed. Please follow the steps to ensure that:
Turn ON the computer and then printer.
The Add New Hardware Wizard window will appear on the Computer screen.
Click the Nextbutton
Insert the installation CD in to the CD/DVD drive on the Computer.
In the Add New Hardware Wizard window, click to select the CD-ROM drive.
Click the Next button.
In the Finish Setup dialog box, click the Finish button.
If the USB driver for the Printer has already been installed, uninstall and then reinstall the driver.
Follow this procedure to reinstall the device driver using the Device Manager utility. IMPORTANT: This procedure must be performed while logged in as Administrator or to an account with Administrator rights.
Click the Start button, and then click Control Panel.
In the Control Panel window, under Pick a category , double-click the Performance and Maintenance icon.
In the Performance and Maintenance window, under or pick a Control Panel icon, double-click the System icon.
In the System Properties window, click the Hardware tab.
On the Hardware tab, in the Device Manager box, click the Device Manager button.
In the Device Manager window, double-click the category icon of the device to be removed.
Under the Device Manager category, click to select the device to be removed.
On the menu bar, click Action.
On the Action menu, click Uninstall .
In the Confirm Device Removal window, click the OK button.
Restart the computer.
NOTE: For some devices the operating system will display a System Settings Change window. Click the Yes button to restart the computer. When the computer restarts, the operating system will find the device and install the driver. If the operating system is unable to automatically find the driver, have the installation wizard search the C:WINDOWSI386 folder.
Remove and reconnect the printer.
does not recognize printer XP computer does not recognize printer. HP printer computer connectivity how to troubleshoot if printer is not connecting to my computer. XP printer issues. how to troubleshoot printer conncting with XP Computer. XP does not recognize printer. Printer is not connecting to my computer. how to reinstall printer driver. how to install native driver for printer. CANON printer is not recognized by the Computer. Epson printer is not recognizing. Epson does not recognize XP. Canon Printer connectivity.
If you insert it on a USB located on motherboard there usually should not be problems, only if you forget to enable in BIOS, USB 2.0 or USB legacy support. If you have a card reader installed, please verify the pin connection required. You can find it in your motherboard manul. USB Legacy is generally required if you want to boot from some USB device and not all motherboards require that to be enabled to recognize and boot from USB devices.
should have at least windows 2000 sp4 or xp sp1 as operating system. plug into usb port on computer while computer is turned on. computer should recognize and install it as mass storage usb device and assign it a drive letter. sometimes xp will recognize it as a panasonic mtp device. this doesn't matter, you can still drag and drop files on it through windows explorer file manager.
Try this: disconnect the player from the computer, turn it off,hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. T.sonic cannot operate after it was formatted in Windows Formatting T.sonic using the “Quick Format” or “Full Format” option in Windows destroys the default format of the T.sonic. To retrieve the default format, you must link to http://www.transcendusa.com/ and download the firmware updates for the T.sonic.