Question about ViewSonic N2750w 27 in. HD-Ready LCD Television

1 Answer

N2750W PROBLEMS WITH DIRECT TV

I have a Viewsonic N2750W LCD TV. I have been having a problem with my satellite TV. I recently had Direct TV receivers installed on TV’s (1 TV has a HD receiver and the other 2 TV’s are older CRT TV’s with the standard receivers. When I hook up the 3rd standard direct TV receiver to my Viewsonic TV my HD receiver TV signal goes bad as well as the other CRT TV’s pictures. Once I remove the Coax cable from the Viewsonic TV signal coming from the satellite box, all TV’s are fine. I had a Direct TV’s rep come
In and have replaced the line as well as splitters and receiver box with no change. They have stated that my Viewsonic TV is the problem. I have disconnected all possible equipment (IE video games PC input A/V and S-video components). My problem still exists.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just press the "PIP" button on the remote it happened to me and i just thought that it looked familiar and i pressed it and it worked hope it helps :)

Posted on Aug 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote codes for the Viewsonic N2750w for Samsung cable box


The code number for my Samsung remote for a Viewsonic TV is:
210

Jul 02, 2014 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Remote codes for the Viewsonic N2750w to work with Samsung cable box


The code number for my Samsung remote for a Viewsonic TV is:
210

Jul 02, 2014 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

ViewSonic 37" Wide (N3733W) TV Set that is connected to Direct TV has picture but no sound.


Based on your description, it is possible that the power supply is starting to go. Before doing anything, first check to see if it is the TV or the source. Use a few different sources to narrow down the problem. You didn't mention what type of hookup you used from the receiver to the TV. Assuming you are using HDMI, it is possible that the cable is intermittent. Try using a different one. Also try as below.
1. Once the TV is working with sound, what happens if you turn the TV off and then back on, is the sound still there?
2. Use the TV antenna input to see if you can replicate the problem using an antenna. If the problem is indeed the TV, it should do the same with the antenna.

Feb 17, 2013 | ViewSonic Flat Panel Televisions

1 Answer

How to connect digital converter box to viewsonic n2750w lcd tv


You can use the RCA cables to the input of the LCD TV so that the HD can be viewed. If HDMI is available it can be used to connect. The cable line must be connected to the box.

Nov 26, 2011 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

I am trying to hook up my Dell inspiron 1520 to my viewsonic n2750w tv. Is there an easy way to do this?


Yes there is... You are going to need a VGA cable and an 1/8 audio cable (for sound)

http://support.dell.com/support/edocs/systems/ins1520/en/om_en/pdf/UX8623D.pdf - On page 29 it shows a picture of the right side of your computer. You will hook the VGA cable to the VGA port (Number 8 on the diagram).
The on your tv you will hook it up to the vga port as well. Page 7 of the following document shows a pictures of the back of your tv. You will hook it up to "L" on the diagram. Be careful to not bend the pins in the connector. http://www.viewsonic.com.au/support/manuals/files/LCd%20TV/N2750w%20User%20Guide%20English.pdf
Switch your tv over to the PC input by clicking the "Input" button. Then make sure your PC is sending a signal, you might have to hit the function key to switch the view.

Mar 05, 2011 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

I need a Main board for a viewsonic N2750W


Hi. can you list the symptoms so the people here can confirm that the main board is the problem?
do you have the back off of the tv? is it a VS10576-1M?
with a bit more info it may be possible to make less costly repairs .

T.

Jun 30, 2009 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

My philips lcd digital tv says I am recieveing analog signals from a digital direct tv sat. How do I get my tv to change to accept digital signals?


First verify that the direct TV satellite box is set to receive and display digital stations. If you old set on the sat was analog, the box may not have been reset. You may have to contact you satellite provider. Next you will have to go to the TV menu and auto program/scan in the stations. This should pick up all the stations.

Mar 16, 2009 | Philips 32PFL5332D 32 in. LCD Television

2 Answers

Where in edmonton can I buy a samsung tv lamp/bulb


www.sears.com parts dept....have make and model ready!
This should fix ya (they can ship part to you or your local store)

Dec 12, 2008 | ViewSonic N2750w 27 in. HD-Ready LCD...

2 Answers

Viewsonic with a black square in the midle of the picture


I spoke to someone at Best Buy yesterday because I had the same problem. In your TV functions you have a text box on. You have to change this to off or to a closed caption setting. Hope this helps.. :)

Aug 25, 2008 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
ViewSonic N2750w 27 in. HD-Ready LCD Television Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Flat Panel Televisions Experts

Cindy Wells

Level 3 Expert

4756 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...