Question about Washing Machines

1 Answer

Washing machine really noisy on spin! - Washing Machines

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Washing Mach... Master
  • 3,463 Answers

Probably main drum bearings worn
If you turn the drum by hand and it feels rough or noisy ,then definately bearings worn and noisy.

Posted on Nov 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Elite Oasis HT makes loud noises during spin cycle.


The tub may be unbalanced and wobbling. This may be due to washing heavy items such as rugs, towels, etc. If it is noisy with regular laundry loads, the mechanism that supports the tub may be loose or broken.

Sep 10, 2012 | Kenmore Oasis Agitator 4.5 cu. ft....

1 Answer

Hotpoint aquarius wf620 washing machine,machine very noisy when in high spin working ok when golng through program


Hi,
While spinning every washing machine is very noisy as it rotates in very high speed.This is normal and no need to worry.
Thank You

Sep 08, 2010 | Hotpoint Washing Machines

1 Answer

Simpson 175 washing machine: spin cycle noisy and motor cuts out after short spin. Bowl feels stiff


Hi just read your posting.Now from the information on your posting the machine is noisy on spin and your motor is cutting out after a short spin.Is this correct?Now does the motor cut out during a wash cycle?If the motor only cuts out during the spin cycle , and with your machine being noisy on spin,I think the fault will be your bearings are corroded.With the bearings being corroded it puts more load on the motor causing the inbuilt thermal overload in the motor to activate and turning the motor off to save it from burning out.Please reply with additional information on, if it cuts out on wash and I am sure I can help you further.

Aug 07, 2010 | Washing Machines

1 Answer

During spinning it is really noisy now. works


you should never use bleach in any machine as it will damage your machine beond repair.and yes i think your spot on the main bearing is gone and needs replaced.adrian,,,,

Jun 28, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Noisy spin cycle


If the machine has been overloaded you may have partially damaged the coupling between the motor and the gearbox.or you may have damaged the gearbox itself...The coupling is a simple job for a tech but the other problem can be more expensive. Fortunately changing a gearbox does not take a long time. Check with a tech....Good luck....Nomess

Apr 20, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Really noisy when in spin mode


If the machine is brand new then you should have removed the transit bolts from the back of the machine before use. If you have had it some time then you will find that the concrete counterweight on the underside of the machine has come loose and needs to be re-tightened. It can be quite awkward on some machines so if it is too indepth for you then please ask a competent person to help you.

Apr 11, 2009 | Hotpoint Aquarius WMA56 Front Load Washer

1 Answer

Kenmore front load washer that's noisy when it spins


on most kenmore front loader after some time the bearing start to wear and the washer will get louder and louder,it is a big repair job!-mike

Mar 23, 2009 | Kenmore HE2 Plus Front Load Washer

2 Answers

REALLY NOISY


posted by mikey b from st Helen's. after experiencing a similar fault on my wt741.i set about determined to find the cause of the noise.On spin,particularly fast spin the washing machine was making a horrendous vibrating banging noise.i eventually traced the fault to the lower concrete weight which simply needed tightening. which is held on with 4 10mm bolts.the weight can be easily accessed by turning the washer on its side.support the outer drum with a small block of wood against casing before lying on its side. you will need a 10mm spanner to get on bolts.hope this was helpful !

Jan 15, 2009 | Siemens WFXD8400UC Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...