Question about Canary (CFT-2062) Transceiver

1 Answer

Canary CFT-2062 connection diagram

I have Canary CFT-2062 transciever with out user manual, could you help me in showing the connection diagram with two swtiches or provide me a user manual? Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I tried to answer this for you yesterday but FixYa didn't put it through I guess. I'll try again.

That device is a "Industrial Media Converter". It is for converting a 100BASE-TX LAN cable into a 100BASE-F fiber optic cable for long-range networking. (2km) There are two ways to use it.

One:
Get two and convert LAN to fiber, then back to LAN.

Two:
Use it to tap into an existing fiber network, like fiber optic Internet.

For the first case; you will need some "Duplex" "multi-mode" fiber optic cable ($1.10 a meter) and an other one of those devices ($50~$300).

For the second case you will also need some fiber optic cable and you will need a network to tap in to. Of course you will need to clear everything with the company that owns that network before you can do any thing. And that’s assuming that they even use the same system level protocols.

To directly answer your question:

1: Hook the 100BASE-TX LAN port up to a PC, Hub, or a switch.

2: Hook up TWO multi-mode fiber optic cables to the device using CT style connecters. Hook one to the TX and one to the RX connectors on the unit.

3: Run the cable how you see fit.

4: Hook the other end up to the interfacing device. Be it joining it to an other cable in an existing network, or to another of those devices.

Note: The TX cable of one device goes to the RX of the other and visa-versa.

-Charlie

P.S. I also have one exactly like that one that I’m trying to find a use for.

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to do to connect my w300i to a jabra,,, I don't find the answer...!


you have to press and hold the button on the jabra for a few seconds till it either stays lit or flashes, then search for it on your phone, then when it asks enter the passcode (if it asks for one)
As you dont mention what version of jabra you have i cant help with the code, consult the user manual

Apr 01, 2011 | Jabra Sony Ericsson W300 / w300i / W550i /...

10 Answers

Nokia ultra, flexi bts installation, commisining & integration


NOKIA ULTRA, FLEXI & METRO HUB-- CAN HELP ONLINE. CALL 09775802091

Mar 22, 2009 | Transceivers

1 Answer

Need a mike wireing diagram for a kenwood trio ts700g transceiver


Hi Mikeymc_2,
With the Connection pins on the plug facing you and the Locating groove in the 6 o'clock position, the pins are numbered from 1 - 4 in an anti clockwise direction.
Pin #1 Microphone
Pin #2 PTT
Pin #3 Chassis Ground
Pin #4 Microphone Ground
Info is from Kenwood. Subject ; Misc Connectors. 26 / 01 / 99. Hope this helps. 73. REX 9Y4PM.
Any problems contact me at rmclea@tstt.net.tt

Feb 27, 2009 | Transceivers

2 Answers

PIN on my cellphone doesnt show after seeing Jabra 2050


FIX YA IS NOT PAYING US THE MONEY WE EARNED (MOST OF US)! AND A SUIT IS BEING FILED WITH THE DISTRICT ATTORNEYS OFFICE! I SUGGEST YOU GO TO ANOTHER SITE TO GET YOUR ANSWERS!

Feb 15, 2009 | Jabra T-Mobile Wing / Dash / SDA /...

2 Answers

Utorrent


yes that indicates that there are no incoming connections..when u click on the triangle you come to an option that says to check if port is forwarded properly and to configure the connection speeds..
i am a regular u torrent user and my port is never forwarded correctly..despite the orange triangle i get very good download speeds..a trick i use is to use the"force start" option on the downloads..right click on a downloading torrent and use force start option..i also noticed that over time the triangle becomes green..hope it helps!

Oct 31, 2008 | Enterasys Distributed Forwarding Engine...

1 Answer

Required,mic wiring details for ft290 transciever


290 plug


looking at the end of the plug that goes into the 290 the pins are labelled, with the notch at the top, the connection to the right is pin 1 , counting clockwise connection 2 thru 6 (6 is to the left of the notch.) 7 centre


1mic earthand common return for up/down button via lock switch and ptt, 2mic, 3ptt, 4 +5V, 5 spkr, 6 up button, 7down button
Hope this helps

Jul 11, 2008 | Transceivers

2 Answers

Circuit diagram for alinco vhf base dr112t/e


go to n go to and join yahoo alinco group

Mar 08, 2008 | Transceivers

1 Answer

HP3000 MPE/iX 4.0 migration


Hi Bryan ... we have been moving files off the 3000 since 1985 ... will return them in CSV, XML, SQL^Server etc as a service ... how much data do you have and what media is it backed up on ... we will return a quote to you ... Birket

Jan 18, 2008 | D-Link DE 853 (DE-853) Transceiver

Not finding what you are looking for?
Canary (CFT-2062) Transceiver Logo

Related Topics:

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canary Transceivers Experts

scramblepad
scramblepad

Level 2 Expert

66 Answers

brian soufane

Level 3 Expert

693 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Canary Transceiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...