- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do a reset: Dell Printer reset 1.With the power on,unplug the power cord from the wall socket. 2.Disconnect the power supply from the back of the printer. 3.Wait 15 seconds. 4.Reconnect the power supply to the back of the printer. Plug the power cord back into the wall socket.
Dell Printers To run a nozzle clean, perform the following steps: 1.Verify the All-In-One Printer 922 is powered on and connected to a computer. 2.Verify that the paper support (input tray) has clean, plain white paper loaded. 3.Press the Menu button. 4.Press the Down button until Mode: Maintenance appears on the LCD screen. 5.Press the Menu button. The Dell 922 Maintenance Menu appears on the LCD screen. 6.Press the Down button until Clean Cartridges appears on the LCD screen. 7.Press the Start button. The AIO 922 prints the cleaning page. This process cleans the ink cartridges and resolves many print quality issues.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
Could have a corrupt driver. Disconnect
the printer or at least be sure it is turned off. I'd do
both and when the CD software program asks you to connect the printer
to the USB port, do so and it should again work properly.
Hope this helps. Bud
To change the language on the Dell 922's display, turn on the printer, then press and hold the Power and Cancel buttons at the same time for about 10 seconds. The language choices will then scroll across the LCD press the up or down arrow key till english appears, then click Menu.
Remove the right ink cartridge (color). You will get an error saying the cartridge is empty, but ignore that. Hit cancel on your printer. Print your job...when your print screen comes up, under preferences check the box for print colors in black and white. Your printer should print just fine without the color cartridge. Ignore the flashing red light.
Lots of luck. I couldn't even get the printer to load the software or install the hardware. I was helped by Dell's tech support (Dell has one of the best tech support programs that exists, in my opinion) for at least 4 hours without any good results. They sent me a replacement for a replacement and I finally got the printer and the software to show by installing it differently. Now it will not print, and, like you, the light to the power button blinks all the time and the printer states that there is no color cartridge installed, even though I have re-installed the new trial cartridge sent by Dell several times. I am going to purchase a new Canon Printer.