- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
h10032.www1.hp.com/ctg/Manual/c00256077.pdf - Above is your user manual.
Turn off your HP DeskJet printer. Turn it back on and connect it to your computer using the USB cable.
To reset the INK Counter, see below.
Click open the "Start" menu on your computer. Click on "Control Panel," and double-click "Printer and Faxes."
Locate the icon of your HP DeskJet Printer along with its model number. Right-click this icon and click on "Properties" from the pop-up list.
Click the "Services" tab and select "Service This Device."
Select the "Estimated Ink Level" tab. Click the option "Reset Ink Level." The printer will then show a refreshed ink cartridge level for your printer.
To reset all settings and print test page. see below.
* Press and hold the Power button. * While holding the Power button, press and release the Resume button four (4) times. * Release the Power button. A self-test page will print.
, click All Programs
, and then click
View ink levels
If a cartridge is low on ink, discontinue these steps, replace the cartridge, and then try printing again.
If the cartridges contain a sufficient amount of ink, continue to the next step.
Follow the on-screen instructions.
After installing a new HP Inkjet print cartridge, the ink level indicator remains at the previous level.
to print and ignore the ink level indicator. The print cartridge is
full of ink, it just is not being measured accurately.
Hi, below follows the support page for your HP, click on the Drivers and Software download link on the page and follow instructions to download drivers. Manuals and support are also available from same page:
Whenever I am need of power cords I use Ebay. Here is one for your system. http://cgi.ebay.com/AC-Adapter-Fits-HP-DeskJet-DJ460-DJ-460-Printer_W0QQitemZ260290984216QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item260290984216&_trksid=p3286.c0.m14&_trkparms=72%3A1199|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50
The installation disk for your printer has a setup wizard that monitors your ink levels in your printer. Go through the installation again as it will not hurt anything and you should find it on one of your pop up screens that it leads you to.