Question about Hitachi 61UWX10B 61" Rear Projection Television

1 Answer

Hitachi Projection 61UWX10B

The comvergence been replaced on the TV. I get the color alined but dont know how to save it after. How do I save it on the remote.

Posted by on

  • James Luchetta Dec 13, 2006

    when convergence is acceptable, press PIP MODE to write dade to ROM menory. ROM WRITE? is displayed to alarm system that ROMwill be overwitten with new data. Press the PIP MODE button again to write displayed dada to ROM.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

Does your set have Magic Focus, if so then you can adjust manually. And when Convergence is acceptable, press Move to write data to ROM memory. Rom Write? is displayed to alarm system that ROM will be over written with new data, Press the Move button again to write displayed data to ROM. Data Write will take 20 sec. aand no picture will be displayed Green dot will be displayed when operation is complete. Press Mute to returen to converg. pattern, then confirm again converg. is acceptable. Press MOVE(ROM WRITE) mode, then press PIP ch to initialize sensor dat positions.

Posted on Sep 21, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The convergence is off on my Hitachi 61UWX10B rear projection TV. I was unabel to fix it using the remote


The chips and 12 resistors need to be replaced, below is a link where you can find them. I've done business with them. They're very reasonable and give you step by step instructions to fix it yourself.




http://www.tvrepairkits.com/xcart/product.php?productid=20080&cat=1647&page=1

Dec 28, 2010 | Hitachi 61UWX10B 61" Rear Projection...

1 Answer

Image is showing with yellow & red shades


Ur convergence is dead.Must know how to solders?Replaced convergence ICS and all it resistors.Tries Tv repair World.com,Tvrepairkits.com to buy a convergence kit.Shop will cost u $300 for parts and labors.

Jan 16, 2010 | Hitachi 61UWX10B 61" Rear Projection...

1 Answer

OK I HAD A GUY COME OUT TO FIX MY TV THE COLORS WERE NOT MATCHING UP?SO HE TOOK SOME BOARD OUT AND PUT SOME NEW PARTS!STILL DIDNT WORK??SO HE GOT INTO SOME MAIN SETTINGS AND MADE MY TV INTO A 42''NOW AND...


Colors 3D like?Ur convergence it dead.Must replaced the convergence ICS all it resistors to solved this porblems.If same problems,than he did put in functional board.

Dec 13, 2009 | Hitachi 61UWX10B 61" Rear Projection...

1 Answer

Hitachi 61uwx10b needs more convergance work than magic focus can apply. Options for savvy DIY'er ?


Know basic soldering?That all require changing convergence ICS all it resistors.Tries Tv repair World.com,Tvrepairkits.com for the convergence kit.

Oct 02, 2009 | Hitachi 61UWX10B 61" Rear Projection...

1 Answer

Hitachi 50ux26b projection TV, the color lines separated...


It sounds like a convergence problem; either bad solder connections at one of the convergence Ic chips or a bad Ic. if this was helpful give me a vote----if one of the chips is now bad it will have to be replaced(usual thing is to replace all the convergence ic chips---most use two and a few 3.

Aug 12, 2009 | Televison & Video

1 Answer

My color doesn't line up on my hitachi 61UWX10B somebody said color mod is bad


Replace the convergence ICs you need two STK392-110 convergence ICs You can get replacement ICs at the folowing link with free isntallation instructions.
http://servicemanuals.vstore.ca/

Mar 06, 2009 | Hitachi 61UWX10B 61" Rear Projection...

2 Answers

Looking for convergence part number


yes they are the same Convergence ICs number STK392-110 you need to replace both ICs. You can get replacement ICs at the following link and they provide free instalation instructions with pics so you can do the job yourself. Heres the link.
http://servicemanuals.vstore.ca/

May 12, 2008 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Hitachi 61UWX10B 61 in | TV will not turn on after reset | any reset button inside the TV ?


My Hitachi was doing the same thing. The culprit is a bad or intermittent 5V relay on the power supply board.

Jan 30, 2008 | Hitachi 61UWX10B 61" Rear Projection...

1 Answer

Hel whit mi hitachi


Remove speaker grill cover on tv lower front.Remove access panel.
Locate small blue push switch = activate convergence grid,then
use 2 & 8 , 4 & 6 , and enter along with adjuster arrows if I
remember right, then magic focus last..............T.

Nov 10, 2007 | Hitachi 43UWX10B 43" Rear Projection...

Not finding what you are looking for?
Hitachi 61UWX10B 61" Rear Projection Television Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

The Knight
The Knight

Level 3 Expert

75767 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...