Question about Fujitsu TeamPad 500 (pbt500-13) Portable Terminal

2 Answers

Problem in connection to a PC

The TeamPad is working, but when i connect it to a PC, through a USB port, it does not get connected. The software am using to connect to the PC is Microsoft Active Sync. Kindly help me in resolving how to connect to the PC and install it and how to share the files between them.

Posted by on

  • Anonymous Feb 05, 2008

    Hi there !

    I also having same problem as you have ... do you got it to work

    Pls email me trunghuynhsrcauhai@yahoo.com anything you can help....

    thank a million..

    Trung

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Google translate on Marvel_co's soluton (GoodLuck): you already reviewed the cable usb? usb is front or to rear, you proved to use it in another different one or another equipment? ?. if it works? I could be problems of configuration of the operating system and habria which to reinstalar it, if it is changing usb, front they are generally 1,1 and to rear 2,0, if it even presents/displays problems uses to driver but present the possible thing, not the one that come with the hardware? and if not contact technical support of fabricante.NVV

Posted on Dec 12, 2006

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

In spanish.... use translator please ya revisaste el cable usb? el usb es front o rear, probaste usarlo en otro diferente o en otro equipo?.... si funciona... pude ser problemas de configuracion del sistema operativo y habria que reinstalarlo, si es cambiando el usb, generalmente los front son 1.1 y los rear 2.0, si aun presenta problemas usa un driver lo mas actual posible, no el que viene con el hardware... y si no uffff soporte tecnico del fabricante.NVV

Posted on Dec 11, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there im trying to transfer photos from mu digital camera to my pc, after being instructed to connect the usb cable from camera to computer box comes up telling me that no connection is located?


Please install the software comes with the camera. so that it install the required software along with usb cable drivers then try to connect the camera.
If not work try to check on another USB port. Otherwise check with another usb cable.

Jul 13, 2011 | Computers & Internet

1 Answer

MY WD MY NOTEBOOK IS NOT DETECTING DO WE NEED SOFTWARE TO INSTALL FOR DETECTION


It does have software for it, but it doesn't require it. Try to connect it to another computer, and if it works there, see if that computer has any detection software. When you connect something to an usb port if it says "this device could work faster" do not hesitate to click that button. Try all of your usb ports. If you use a mac try connecting it to a pc.

Jun 13, 2011 | Western Digital My Book Essential 1TB...

2 Answers

I cannot connect my camera to my pc


At first connect your camera through USB port and install your Driver for your camera. Now you are able to connect camera with your pc

May 09, 2011 | Samsung Vimicro USB2.0 UVC PC Camera

1 Answer

Can't connect panasonic nv-gs33 to pc via usb


Uinstall the software and then reconnect the camcorder via the USB. if this is detected then install to connect.
If there is no detection then the software must be reinstalled and connected. Use a different port to check. shut off the camcorder to connect , if not switch on and connect.
If either wont work then remove the memory card and try if it connect.
If not check if the cam is detected in another PC to confirm the fault of PC or cam.

Aug 27, 2010 | Panasonic NV-GS33 Mini DV Digital...

2 Answers

Where i get the fxd sigmatel 3600 driver to connect mobile and pc


Thanq for your kind information, but i need to connect GPRS from Sigmatel 3600, how can i do this

May 14, 2009 | Cell Phones

2 Answers

I can't connect my samsung j700 to my pc with the USB.


this might work you may have to try all of your usb ports

Jan 09, 2009 | Samsung J700 Cellular Phone

1 Answer

Wireless Gigaware 26-990 unable to connect


Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

Dec 24, 2008 | Computers & Internet

2 Answers

Dymo stamps doesn't see USB Dymo scale


You might try connecting the USB cable directly to one of the computer's USB ports.  My scale (DigiWeigh) showed as not connected when it was connected to a USB hub.  When it is connected directly to the computer, it shows the scale as connected.  Unfortunately, it still won't transfer weights to the Dymo Stamps software.

Dec 11, 2008 | Dymo DateMark Date/Time Stamper

1 Answer

SAMSUNG SGH A-707 USB CONNECTION


Yes it might be the problem..First try a different cable..Also check the data transfer port(wher you connect the cable)on your phone for bent/broken pins..If the pins aredamaged you will have to get a new data port and dont worry its very cheap..usually 5$ or less..

Oct 19, 2007 | Samsung SYNC SGH-A707 Cellular Phone

2 Answers

Installing an application


Hi Evelyne !
I hope you are still on this ....
It sound like you got it communicate to server some how....
I really want to talk with you... pls send me a email...
I have few of these teampad 500 they all brand new but i can't make it synch with my computer....

Trung huynh

Dec 13, 2006 | Fujitsu TeamPad 500 (pbt500-13) Portable...

Not finding what you are looking for?
Fujitsu TeamPad 500 (pbt500-13) Portable Terminal Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

Computer Links

Level 3 Expert

2386 Answers

Are you a Fujitsu Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...