Question about Sony Cyber-Shot DSC-T5 Digital Camera

1 Answer

CANNOT TRANSFER IMAGES TO MY CPU

I can no longer transfer images from my camera to my cpu. it says there is a parameter error. sometimes the images wont even show up. i connected my USB cable to another cpu and it still didnt work. please help!

Posted by on

  • olivia-19 Jan 14, 2009

    i cannot upload photos on to my computer as it says that there is a parameter error! please please help!!



    Olivia

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 89 Answers

The USB Port connectors or the associated components like the processor IC may be having damages due to transient electrical spikes. refer to a service center and we can help you with the spares and service manuals.

Posted on Dec 12, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error message: communication error


I use a USB cable and never see a communication error

Jul 08, 2015 | Canon PowerShot SX520 HS Digital Camera...

2 Answers

Camera says "communication error" when trying to transfer images to computer. Why?


Try NOT connecting your camera to your computer.

The best way to transfer pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa.
Organize edit and share your photos

Jan 10, 2012 | Canon G12 Digital Camera

1 Answer

Sony cybershot P200 says 'File Error'


Hi,

The LCD screen may display a FILE ERROR message when trying to view a still image on the camera if the image was rotated, modified and overwritten using editing software on a computer. To play images you have taken on the camera, it is recommended that you do not make any changes to the original image files. I suggest that you transfer the images from the Camera to the computer and check if it works. After transferring the images, get the Memory formatted from the Camera and start capturing new images. The edited images will not get displayed in the Camera again. Please try not to edit the images in the Computer without transferring it.


Thanks.

KenSolutions

FixYa

Sep 12, 2010 | Sony Cyber-Shot DSC-P200 Digital Camera

1 Answer

Transfer software not reading images on device


download or update your driver for you camera. then open your software, turn on camera, and then hook up via usb.

Jul 20, 2009 | HP Photosmart M425 Digital Camera

1 Answer

What to do, I forgot to put memory card in HP R707?


Hi

Do you want the pictures transferred to your memory card? that depends on the option available on the camera, try inserting the memory card. select a picture then check options if you can move it to a memory card. if not, download it to a computer and transfer it to the memory card folder.

Hope this help

Jan 11, 2009 | HP Photosmart R707 Digital Camera

1 Answer

No pictures


Have you checked the HP hep site?
Here is their suggestion
Introduction This document explains how to transfer images from the camera to a computer running Windows XP operating system by using a universal serial bus (USB) cable. Transferring the images Follow the steps below to transfer images from the camera to a Windows XP computer. Step one: Connect the camera to the computer
  1. Turn off the camera.
  2. The camera came with a special USB cable for connecting the camera to a computer. Connect the large end of that USB cable to the computer. Figure 1: Connect the USB cable c00878070.gif
  3. Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.
Step two: Transfer the images Choose one of the following methods to transfer the image files: Method one: Transfer images with the HP Photosmart software
  1. Make sure the HP Photosmart software is installed on the computer. If the software is loaded, then go to step 2. If the software is not loaded, click here to upgrade to the latest version of imaging and printing software (in English).
  2. If images on the camera are selected for printing or selected for HP Instant Share destinations, make sure the computer is connected to a printer and the Internet.
  3. Turn on the camera. The HP Import Photos software starts on your computer. If you have set the software to automatically transfer the images in the camera, the images automatically transfer to the computer. Otherwise, in the Transfer images from Camera/Card screen, click Start Transfer . The images are transferred to the computer, and then if there are any still images that were previously selected for HP Instant Share destinations, those actions are started.
  4. When the Image Action Summary screen appears on the computer, you can disconnect the camera from the computer.
Method two: Transfer images without the HP Photosmart software If you do not, or cannot, install HP Photosmart Software on your computer, you can still transfer images from the camera to the computer using the Picture Transfer Protocol (PTP) in Windows XP. Follow the steps below to transfer images.
  1. Turn on the camera. Windows will automatically launch a program to transfer the images.
  2. When the images have finished transferring, disconnect the camera from the computer.
  3. If you encounter problems, check that the camera USB Configuration in the Setup Menu is set to Digital Camera .
    1. While in Live View , press the Live View/Playbackc00591915.gif button, and then press the Menu/OKc00280209.gif button.
    2. Scroll to the Setup Menuc00595863.gif using the left/right arrow c00280208.gif buttons.
    3. Use the up/down arrow c00280207.gif buttons to scroll through the Setup Menu to highlight the USB option.
    4. Use the left/right arrow c00280208.gif buttons to change the setting to Digital Camera and then press the Menu/OKc00280209.gif button.
    5. To exit from the Setup Menu , press the Live View/Playbackc00591915.gif button.
  4. Reconnect the camera to the computer.

Mar 06, 2008 | HP Photosmart M415 Digital Camera

1 Answer

Tranferring images


Best thing here is to invest in a usb card reader. I suspect there may be a firmware problem. Check that you are doing right though before you do anything else.

Apr 22, 2007 | Olympus Camedia C-4000 Zoom Digital Camera

1 Answer

Error: "Insufficient free space on startup disk"


Nikon View requires at least twice as much free space on the startup disk as the size of the CF Card being used to transfer images. For example, to transfer images from a 1GB card you will need at least 2GB free space for temporary storage while the images are transfered. The free space must be on the hard disk that the operating system is starting up from, even if the destination for the transfer is on a different drive.

Aug 30, 2005 | Nikon Coolpix 3200 Digital Camera

1 Answer

Error: "Insufficient free space on startup disk"


Nikon View requires at least twice as much free space on the startup disk as the size of the CF Card being used to transfer images. For example, to transfer images from a 1GB card you will need at least 2GB free space for temporary storage while the images are transfered. The free space must be on the hard disk that the operating system is starting up from, even if the destination for the transfer is on a different drive.

Aug 29, 2005 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Sony Cyber-Shot DSC-T5 Digital Camera Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

james laughton
james laughton

Level 3 Expert

2192 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

27248 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...