Question about Norelco 7886XL Electric Shaver

Open Question

Spring fell out of razor

Need nerelco t5000 user manual and dont no where ot find it

Posted by on

1 Suggested Answer

brector3
  • 1551 Answers

SOURCE: I need a users manual for my philips norelco

The user manual will not help you with this because the Arcitec models were designed so that the cutters could NOT be removed to be cleaned. This is a major disadvantage with the Arcitec models as you can not disassemble the heads to thoroughly clean them. This causes you to have to replace them more frequently.
You can try running the shaver head in a dish of rubbing alcohol to try to loosen the build-up and rinse it out but that's about all you can do.
If you need to replace them, you will find at shaveroutlet.com. See link below

http://shaveroutlet.com/shaver-replacement-parts/norelco-philips-rq10-arcitec-replacement-heads-p-353.html

Posted on Nov 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The spring has fell out of the head when i was changing top i dont know how it goes back together


pull the black thing with the little blades until it detach, put the spring inside the hole, reassemble

May 09, 2010 | Braun Silk-epil 3370 Epilator

1 Answer

I dont know how to turn on my remington rs 8966 razor


The best thing here is a user manual. I do not know how to get you a manual for your specific model as your shaver was not bought in the US. In the US, your shaver was known as model MS3-3000. You will find a user manul for this model with the link below. You will find complete operating instructions in the manual.

http://remington-products.com//manuals/ib_ms3tct.pdf

Mar 01, 2010 | Remington Health & Beauty

1 Answer

I dropped the razor and the 3 heads fell off, nothing is broken, but I can't figure out how to put it back together Help!


all you have to do is put them back in there place you should have two legs that spring out from the blades align them with the 2 holes on the shaver and push them in

Oct 21, 2009 | Philips Philishave HQ8150 Electric Shaver

2 Answers

Need a spring for the razor head on norelco 7775x


U CAN BUY THAT PART AT MARBECK.COM THATS WHERE I BUY ALL MY PARTS FOR MY COOL SKIN

Apr 18, 2009 | Norelco Cool Skin 7775X Electric Shaver

1 Answer

The razor head comes loose from the two arms.


I had a similar problem where one of the side covers popped off. I was able to reattach it, by carefully aligning the spring and pushing back into place. If you've lost the pin, you're out of luck. Braun does not make these kinds of parts available for user servicing, unfortunately.

However, the 7000 series models are all compatible with each other in terms of motor, battery, and razor head armature. You could try locating a moderately used example on the cheap (maybe less than $20) and then cannibalize it for the parts you need.

Do NOT send it off to Braun for servicing, as you will be charged much more than the shaver is worth. If it comes to that, you're better off just going with an 8000 series shaver.

Mar 11, 2009 | Braun Syncro 7526 Electric Shaver

1 Answer

Springs fell out


I did get it fixed. I kept looking at it and studying it and I finally figured out that the small, gold head is where they had to go. I pushed on it and it finally fell out. I saw two small holes that looked like they were the same size as the springs. I put them in and when I put the piece back in the razor, the spring lined up with 2 small pegs on the inside. I snapped the head in place and the gold bars then moved up and down with a little resistence. I turned the shaver on and it worked just fine.

Sep 10, 2008 | Health & Beauty

2 Answers

Wahl razor's not cutting, how do I fix it?


have you tried taking apart the blades and replacing them so that they line up together? Have you had a professional shear sharpener look at your blades? mabie all they need is to be sharpened again. Blades like knives or scissors need to be sharpened every once in a while. Also try replacing the blades with a new ones. The blades may have worn out. also try oiling the blades every once in a while.

Jun 24, 2008 | Wahl The Peanut Hair Trimmer

4 Answers

Fell apart..help please!!!


The larger white pieice that has holes in it should be connected between both the spring and the smaller razor, The bottom of the larger white peice has to be able to fit in the peice of medal that moves in a circular motion inside the top part.

First, Try to make the hooks of the spring go in pretty securly inside the small holes. The flat side of the white peice has to be connected to the flat side of the smaller razor. They should kinda snap together on the top hole. I had to gently place the parts together and push the larger white peice in the medal by placeing the larger razor peice right on top and pressing down really hard. You might hear some snapping but the peices should all connect together and the large medal peice should connect to the black groves and press hard. Hold in place while putting the screws back in.

Jun 21, 2008 | Conair GMT182CS

Not finding what you are looking for?
Norelco 7886XL Electric Shaver Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Norelco Health & Beauty Experts

shaveroutlet.com
shaveroutlet.com

Level 3 Expert

1551 Answers

Robert McClure

Level 2 Expert

160 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Are you a Norelco Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...