GEMINI CDM-500 FUSE - Philips CDM-500 2-Disc CD Player

It depends on what connections the laptop has. Most have an audio in socket. So you can use that. All you need is to find a audio out on the deck. I looked at an illustration and it has an headphone socket. So you could use that. Just keep the volume control low.

if it's to record the Audio you need some kind of interface analog(RCA ) to usb like the behringer UCA 202 Now if it's to watch or to try to record Audio and Video you need to look at a video capture type of interface composite audio video to interface like the SIIG USB 2.0 Video Capture Device just make sure its compatible with your OS. Now if you try to use it as a Midi controller with program like Serato , Virtual dj ... you are out of luck this system is not compatible .
Good luck.

This is a job for a Technician of that brand. The unit is not knowing the pause mode is activated so there may be a bad cable or solder joint linking a mechanical IC to that of the main processor.

You would have to get it to a service center. It could be the control or some supporting circuitry. If there is no service center near you. You can send it in to pro Line Music 215-736-8055

The CD transport needs to be replaced. If you can not get it done, you can send it in to Pro Line Music [email protected]

Typical problem is a little rubber belt that drives the tray carriage from a motor... it slips or deteriorates.

Me too. Did you find anywhere that sells gemini parts?

You can probably patch the audio into the audio input jacks of the TV, however without a video signal there would be no picture on the TV, only audio... It is also possible that without a video signal, the TV may mute the audio inputs...

you may need to get a new player because this one sounds broken and can only b temporarally fixed.

HI. i would try cleaning the lens with cleaning disc. if this doesn't produce results, the issue will then be a damaged optical lens assembly. you will need to replace this assembly in this case.