On the base press the volume up [^] key. Repeat pressing to get higher volume. Press volume down [V] for reducing the volume. Press and hold volume down for two seconds to turn ringer off. On the handset, you can use the menu to turn ringer on and off.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The procedure varies from phone to phone. Since you neglected to specify the model of your Uniden DECT 6.0 phone I can only suggest you select it from the list beginning here to download a copy of the manual.
Hit the up or down arrow keys several times. (either key will work) and the ringer will rotate through Ringer off - Ringer low - Ringer high... one set will be a steady ring, the other set will be a warble ring. This works on the phone made for RadioShack with 5.8 GHz on the front and Cat. No. 43-155 under the battery in the battery compartment.
Browsing through the menu should eventually show you the page for setting the ringer.
Choose the menu by pressing the button, then jsut use the arrow key for stepping through it until you find the ringer menu item.
If the phone has a dial tone, adjust the ringer loudness (this adjustment is on
the bottom of some phones). Also check to see if there is a switch for turning
off the ringer--and turn it on.
cases, you can't connect more than five phones to a given line or they won't
ring properly. If this is your situation, you may have to disconnect one or more
phones, or at least turn their ringers off.
Here are some suggestions
You may adjust the ringer, speaker, handset and headset volumes independently with
the VOLUME ^ and VOLUME v buttons. Your telephone comes with predetermined
settings which can be adjusted to individual taste. You will hear an error tone when
the maximum or minimum volume level is reached. During volume adjustment, a
?dashed line? icon shows in the display.
Adjusting the Ringer Volume
Press the VOLUME ^ or v button while in on-hook mode.
Selecting a Ringer Tone
You may select the ringer tone for each line independently. You may choose to turn
the ringer off or select one of the four available ringer tones for each line.
1. Press STORE. The red indicator blinks indicating unit is in Store Mode.
2. Use the number pad to select a ringer tone 0 through 4 (selecting 0 turns the ringer
3. Press STORE and then press the desired line button.
NOTE: The line indicators continue to flash for incoming calls even
with the ringer disabled. You may not select the same ringer tone
for both lines.
Checking the Ringer Settings
Check the setting or each ringer (on, off) by pressing STORE, followed by LINE 1 or
LINE 2 button when the phone is on the hook. The ringer setting of the selected line
will be shown in the display.
If there are any further questions or comments please post here.
Please rate this solution through fix-it.