Question about Canon MultiPASS F60 All-In-One InkJet Printer

1 Answer

My printer is saying wasted ink near full

It is a 2002-F60 MultiPASS

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 270 Answers

Canon says...

1. On the operator panel, press and hold the <ON/OFF> button for one second. (The display will go blank.)

Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer.

2. Wait approximately ten seconds and then press the <ON/OFF> button again.

3. Wait until the device has completed its cycling process before submitting another job request.




Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Waste ink near full - how do I empty it?


Hi

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jan 23, 2010 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Waste ink nearly full LCD ERRoR on Cannon multipass F60 printer


HiHello try ths

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Oct 17, 2009 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

My Canon Multipass F60's alarm is blinking and message says "Waste Ink near full". What should i do?


My canon c530 multipass fax machine has the alarm light blinking and wont fax anything. can anyone please help me?

Oct 01, 2009 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Canon multipass f80 error waste ink near full


ok

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jun 20, 2009 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

Canon MultiPass F60 "Waste ink near full"


Okay, follow these steps below to reset this message:

1) Enter SERVICE MODE. By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Then call Canon 1-800-828-4040

Just inform them that you have already reset the counter so the error is gone, but you needed to know if there is a part that needs cleaned or replaced to prevent further problems.

Jan 19, 2009 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Canon Multi pass F60 (waste tank near full)


Power off and on at button. If message continues it needs service.

Sep 19, 2008 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Canon F60 waste ink near full message


Hi. I actually had to reset the waste ink volume counter on my F60 and found a solution posted by NerdRUs that helped me. So I copied and pasted it below:

Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Apr 22, 2008 | Canon MultiPASS F60 All-In-One InkJet...

2 Answers

WASTE INK NEAR FULL


I have the same problem and my power will not turn on if the resume button is depressed. Is there a way to fix the waste ink problem?

Feb 06, 2008 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Error light, continuous blinking, can not rest


Can't believe we are all having same problem around the same point in time - built in obsolescence maybe. All reports are coming in betweek Oct, & Dec, 0f 2007

Dec 12, 2007 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Canon f60 print check


i cannot print alarm light is on window reads "waste ink near full"

Mar 04, 2007 | Canon MultiPASS F60 All-In-One InkJet...

Not finding what you are looking for?
Canon MultiPASS F60 All-In-One InkJet Printer Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...