Question about Belkin (F5D5231-4) Router

1 Answer

Unable to connect to internet

Following set up wizard for belkin n wireless modem router i have input my isp username and password the unit checks router and tries to connect to internet but says that orange do not verify details something to do with a ping on the internet. i have verified my details with orange everything checks out . Do i need to keep filters on my phone sockets or can these be removed with this system any help out there

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 270 Answers

If this is a DSL modem, then a filter should NOT be between it and the wall socket. Filters should only be on house phones and fax equipment lines.

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No web conectivity


You have to determine first if the Internet is working with you Internet service provider. If its a cable Internet you just have to reboot the modem router and computer in a correct sequence. Turn off modem, router and computer. No sequence in turning off the devices but when you turn them on there is. But you have to leave them of for 10 secs. Turn on the modem first then router and lastly the computer. If the connection is DSL you have to get the username and password from your Internet provider. You have to access the configuration page for the Belkin and you have to enter the username and password. There should be a wizard that you need to follow to set it up.

May 21, 2011 | Belkin Basic Wireless Router

1 Answer

I want to conect a belkin wireless router to the postoffice broardband how do i do this?


Plase connect the router with the computer using a lan cable. go to dos prompt and do a ipconfig
then note the default gateway and then open internet explorer or firefox and write \\ followed by the gateway ip. usually the gateway is 192.168.1.1 so you write \\192.168.1.1.

open internet explorer or firefox and type \\192.168.1.1 and press enter
enter useranme as admin and the password as password or admin or leave it blank and press enter
Configure the settings
select the internet connection type(for eg its pppoe for DSL connection) if you are chosing pppoe please make sure that your modem is in bridge mode. If your modem stores your isp username and password then select Dynamic ip address.
Please check with your isp regarding the connection type.

Jul 07, 2010 | Belkin (F5D5231-4) Router

1 Answer

I bought the belkin play router and it says it cant find a connection to my verizon modem. Help


what type of internet do you have? does your internet require a username and password to connect ? Im not familiar with verizon but I believe you will have to input the information such as username and password for the PPPOE conenction on the router to be able to access the internet from the modem and be able to send the signal as a wireless internet from your router, try getting in your belkins GUI graphical user interface to be able to change the settings for the PPPOE connection from the modem to work and give access to the router on this case ^_^

Jun 03, 2010 | Belkin (F5D7230-4) Router (587009)

2 Answers

Belkin F5D8236-4 Wireless Router will not connect to pannaway dsl modem with same settings as router I am replacing. Dynamic IP address setup. Modem light continously blinks orange. No internet light.


1) With direct connect with modem, check the IP address and default gateway.
(I came across such a modem, it gave default gateway as 192.168.1.254)
I also had the doubt of configuring as a dynamic connection
But it won't work!
Contact your ISP to completely bridge the modem and configure the dsl modem as PPPoE connection with correct username and password.
Finally connect the modem to router and do a complete network power cycle, i.e.: Unplug power from router 1st, then power from modem, unplug the telephone line and now do the exact reverse process... Plug back the tel. cable, then power to modem... now WAIT for lights on modem to come back, then plug in the power to router. This will surely work.

Oct 03, 2009 | Belkin F5D8236-4 Router

1 Answer

The modem's been changed and cannot locate the CD to the driver to connect to the internet. The model is DSL-G604T/AU V.A3.


Hi! your dlink dsl-604T is adsl router modem, you can access the setup page of your modem router by connecting your computer directly to the port1 of the modem router and the cable from your isp should be connected to the WAN port. u need to pull up the browser and type in at the url:192.168.1.1 and it will ask the username and password, by default the username is admin and the password is 1234 or leave it blank, but i suggest before u do this steps. u need to reset your modem/router. there is a reset button on the back of the router and press it for 20secs and then unplug and replug it after 10secs. after that u can pull up the setup page of the router.. to check the default gateway of the router, right click the network icon on the lower right of the task bar and select status and it will show the ip address, subnet and default gateway..

u need to know what internet settings u have with your internet provider, bcoz once u access the setup wizard it will ask u the type like auto-dhcp, pppoe, static etc.. if your isp gives u a username and pass to connect to internet u have to select pppoe or if u are given a static ip address setting u need to select static ip... just follow the setup wizard..

Aug 17, 2009 | D-Link DSL-G604T Wireless Router

1 Answer

Sharing a connection with wired and wireless computers


i just have a question, do you have an internet connection when your computer connected to your modem(the device provided by your Internet Service Provider)? Possible that the Belkin not working is that maybe you don't have internet from ypur ISP.

I suggest you to connect your computer first to the modem, turn off the pc and afterwards the modem, after 2 minutes, turn on the modem first, when all lights stable, turn on the pc and check if you can go online. If not, better contact your ISP first for them to check the connection. If everything working fine with your ISP. Reply to this post again and provide the following information.

Your ISP?
Brand of the Modem?
Brand of the Belkin Router?
Type of Connection you have form ISP, DSL or CABLE?
If DSL, please make sure that you have a username and password from your ISP?
How many computers do you have?
What is the Windows Version your using or the Operating System?

Thanks.

Sep 29, 2008 | Belkin (F5D7231UK4) Wireless Router

1 Answer

Can not connect to the internet in trying to setup the router.


Yes time warner is a cable connection and they dont require a username and pasword. You can set up the router manually by accessing its set up page. By default the router's IP is 192.168.2.1. Make sure to set the wan connection type to dynamic, change the wan mac address or clone your pc's mac. Then save the settings. Check your internet connection.

Aug 18, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

ISP blocking my internet connection.


hello!

-- do you know your verizon username and password?
-- what is the operating system of your computer?
-- have you tried connecting your computer directly to the modem to check if you can get online?

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings, you need to input your verizon username and password on the router setup page then save the settings.
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

May 26, 2008 | NetGear WGR614 Wireless Router

1 Answer

Belkin 54g 2.4 ghz wireless router model # f4d7230-4


Hi, Instead of using the softwae disk, try going to the router's config page,

Connect your computer toi the router using the ethernet cable that came with it

then click here http://192.168.1.1

the usename is admin and the password is password

Use the basic setup wizard in there to input your isp username and password

Feb 22, 2008 | Belkin (F5D72304F5D7010) Wireless Router

3 Answers

Downloads locks up - Belkin N1 Wireless Router


I had the same problem. My Belkin N1 Router was constantly dropping the WiFi connection (every few minutes). I tried several solutions I found on different forums:
Change the channel selection from Auto to a specific channel -- I tried all 13 channels, but no improvement.

Update the firmware to the latest (Beta) version -- still no improvement.

Finally I enabled "Protected Mode" and the connection seems fine now. Hope this helps, and good luck!

Nov 05, 2007 | Belkin (F5D8231-4) Wireless Router...

Not finding what you are looking for?
Belkin (F5D5231-4) Router Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...