- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello Delete any saved game files from your x box hard drive.Unplug x box for 5 min. Plug back in and power up. Try game again. Chances are files have become corrupt.Also delete any files from GOW 1 and 2.
If you have flashed your xbox 360 with 1.61 firmware, have you got the Wave 4 patch disc, lot of currently released games need this disc to be run first before you run the copied games,you can check on google for the updated list of Wave 4 copy protection enabled games.
If you face problem with all copied game discs, even for older ones like Gears of War 2, Halo 3 etc then you should get the drive checked with the person from whom you have got your Xbox 360 modded
I had a similar problem to this and ended up having to recover my profile which fixed it in my case.
The first thing I tried though was to go into my HDD and delete the game files for the game (in my case it was Gears of War 2). I cleared out the GoW2 folder (losing my saved games). This didn't work in my case so I went onto the profile recovery method, which solved it.
If you want to try profile recovery here is a link to show you what to do.
actually mine is doing the same thing. from wut my friends have told me, you cant do anything. the red rings of death r on their way and all u can do is wait. but when that time cums then u get a new xbox 4 free.
Your laser lens is going out and needs replacement. Either replace the whole drive (but switch out your old circuit board into the new drive) or buy a new laser and install it in (model number is etched into the bottom of the laser).
You have to switch your old board out of the old drive into the new due to Microsoft having "Keys" locked into each drive so you cant fix your system easily. So remember to keep the boards seperate and switch the old board into the new drive and install the new drice... should fix it nicely.