Question about Toshiba e-Studio162D Copier

1 Answer

Program mode can you tell me how to get into the program mode in toshiba e studio 162d?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

L have a error code H-2-00 on e studio 162d how should get into program mode to reset it?

Posted on Nov 18, 2008

  • abonyowaayu Nov 18, 2008

    what is error code H2-00?

  • abonyowaayu Nov 18, 2008

    what is error code H2-00 on e studio 162d?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have 162d toshiba copier images are very light?


Sadly you're probably going to need one. That's the danger of having a machine without a Maintenance Agreement. Sounds to me like the developer or drum or both are worn out. PM, and PMs can be pricey without an MA.

Dec 29, 2012 | Toshiba Printers & Copiers

1 Answer

Can not find drivers for e-studio 162 printer for windows 7


Go to http://www.copiers.toshiba.com/support/index.jsp# , click on "b/w copier" , select from the right e-Studio 162D and select the driver corresponding to the type of windows you have and the type of controller :
Identify the Installed Controller

The e-STUDIO162 Series can do GDI printing out of the box. It can do PCL printing if the optional GA-1170 controller is installed. The GA-1170 is attached to the back of the MFP and connects to the USB port. Postscript printing is available if the Postscript option has been installed on the GA-1170.


Good luck

Aug 08, 2011 | Toshiba e-STUDIO162D All-In-One Laser...

1 Answer

The error indicator is staying lit constantly on Toshiba e-studio


The drum counter reaches 25000 copies , it's time to change the drum and reset counter .
Enter the reset mode by pressing : # - * - c - * .
then press : 20 - start -01- start - CA - CA .
Hope this will help .

Feb 28, 2010 | Toshiba e-Studio162D Copier

1 Answer

How do you reset Admin on a Toshiba e-studio 162D


In the manual it says to "Turn on power while holding down the status button on the network expansion kit. Continue to hold down the status button until a beep sounds."

It looks like the default password was TOSHIBA which took me forever to find. The user name should just be admin.

Feb 25, 2010 | Toshiba e-Studio162D Copier

1 Answer

Toshiba e-studio 162d makes smudgy black margin


Hello sir; you do need a drum blade to replace at least.

May 11, 2009 | Toshiba 2860 Copier

2 Answers

Error code H2-00 on e studio 162d?


u have a dirty thirmistor in fusr unit.first clean it.then do this procedure.press clear key,auto photo key,clear,auto photo key in a sequence.copier will go dead .when display goes dead just press 14 start key.copier will take few second and will bi ok.by MIAN AKHLAQ

Nov 18, 2008 | Toshiba e-Studio162D Copier

1 Answer

How to get into the service mode


press button C & 8 at the same time to show u the error no. its the error no that will let u know the fault type.

Sep 29, 2008 | Toshiba e-Studio162 Copier

1 Answer

NEW DRUM


joe, to replace the drum, you need to remove the cover from the front of the drum unit it has three locking tabs,one removed,take main charger/grid unit out,located on the top of drum unit,two screws one on each end. the drum is held in with a cam lock shaft located on the front of the drum unit,turn it couter clockwise,your drum can now be removed,it's recomended that you replace the cleaning blade also,two scews. you'll have to coat the new drum with toner and manually turn it against the new cleanig blade,if you dont the blade may flip and ruin your new drum.reassemble

May 01, 2008 | Toshiba e-Studio162D Copier

1 Answer

Toshiba e-studio 150


Hi you have a fuser problem. The fuser does not heatup normaly. Sometimes it can besolved with the following code. Enter Sim mode. "c" - Auto/text/photo - "c" - Auto/text/photo - 14 -start - 00 - start. To exit sim mode press clear all. Turn the machine off and on, check operation. If that does not work check the Termosters, termostats, and heater lamps and wiring harnes.

Hope it helps

Feb 19, 2008 | Toshiba e-Studio120 Copier

Not finding what you are looking for?
Toshiba e-Studio162D Copier Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you a Toshiba Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...