Question about Samsung LN-T4661F 46 in. LCD HDTV

2 Answers

Picture setting regularly changes to dynamic from standard

Every time that I change the setting to standard, it eventually changes back to dynamic on its own. It will stay at the standard setting for awhile (10-20 minnutes), but it always goes back to dynamic with no input from me.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 98 Answers

You need to change the option throgh the service mode.
You can not access that mode without permission from Samsung.
better to contact Samsung call center.

Posted on Mar 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It sounds like your TV is in Shop Mode.
Shop mode is a set of picture parameters that have been optimized for a store showroom or display floor. Shop mode does not allow you savePicture setting regularly changes to dynamic from  - icon1.png any picture settings such as brightness or contrast.
To get the TVicon1.png out of Shop Mode press and hold the Menu button on the front panel for three seconds, the picture will blank momentarily then reappear with "Dynamic Mode" shown on the screen. At this point the picture parameters can be changed and saved.

If this method doesn't work for your TV there is an alternate method that might.

From the buttons on the front of the TV (not the remote):
1) Press the Volume + (increase volume) button
2) Whilst the volume button is pressed, press and keep pressed the menu button
3) Let go of the volume button and keep the menu button pressed for 5 seconds
4) After this time the screen should go blank and "Dynamic" will appear at the bottom of the screen.


from http://www.fixya.com/support/t399140-samsung_le46f8_picture_setting

Posted on Jul 27, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung 55 inch led


Look in the owner manual--that likely is default setting and if a box used for signal that is possible also==

Apr 02, 2012 | Flat Panel Televisions

1 Answer

LOOKING FOR PICTURE SETTING SAMSUNG MO.NO.LN-T5265F


This may help you...you can also get an owners manual free on line.


English - 23
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select "Mode".
Press the ??² or ??¼ buttons to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
?³ Choose Dynamic to increase the clarity and sharpness of the picture.
?³ Choose Standard for the standard factory settings.
?³ Choose Movie for a natural Image without picture enhancements.
3. Press the ??² or ??¼ buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint(G/R)", then press the ENTER button.
4. Press the ??? or ??? buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the ??? button increases it.
Press the ENTER button.
Press the EXIT button to exit.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint(G/R)
the OSD will be adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available.
Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
Picture Control
Move Enter Return
Mode : Dynamic ???
Contrast 1 00
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 1 00
??¼More
TV Picture
Move Enter Return
Mode : Dynamic
Contrast 1 00
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 1 0
??¼More
TV Picture
Dynamic
Standard
Movie
Move Enter Return
Mode : Dynamic ???
Contrast 1 00
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 1 0
??¼More
TV Picture
50
??² Con trast ??¼
Move Adjust Return
English - 24
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1. Press the MENU button to display the menu.
Press the ENTER button to select "Picture".
2. Press the ??² or ??¼ button to select "Color Tone", then press the ENT ER button.
3. Press the ??² or ??¼ button to select "Cool2", "Cool1", "Normal", "Warm1",
or "Warm2".
Press the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2
cannot be selected. Movie mode is only available.
Move Enter Return
??²More
Color Tone : Cool2 ???
Detailed settings ???
Size : 16 : 9 ???
Digital NR : Low ???
Active Color : On ???
DNle : On ???
Reset : OK ???
TV Picture
Move Enter Return
??²More
Color Tone : Cool2
Detailed settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle : On
Reset : OK
TV Picture
Cool2
Cool1
Normal
Warm1
Warm2
Activating Backlight
You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)
1. Press the MENU button to display the menu.
Press the ENTER button to select "Picture".
2. Press the ??² or ??¼ button to select "Backlight", then press the ENTER button.
3. Press the ??? or ??? button to decrease or increase the valueof the backlight
brightness.
Press the ENTER button.
Press the EXIT button to exit.
Move Enter Return
Mode : Dynamic ???
Contrast 1 00
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balcklight 1 0
??¼More
TV Picture
5
??² Balcklight
??¼
Move Adjust Return
Move Enter Return
??²More
Color Tone : Cool2
Detailed settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle : Off
Reset : OK
TV Picture
OK
Cancel
Resetting the Picture Settings to the Factory Defaults
1. Press the ??² or ??¼ button to select "Reset", then press the ENTER button.
Press the ??² or ??¼ button to select "Cancel" or "OK" then press the ENTER button.
Press the EXIT button to exit.
Each mode can be reset.

Feb 04, 2011 | Flat Panel Televisions

1 Answer

I notice my lcd brightness has reduce now this is 2 years old this problem remains same on Dynamic picture mode as well i have check this by connect to a pc and to a DVD using HDMI port...


hi,
First of all check the back light setting of your tv. you can see it on the picture setting menu.
Just check when you adjust the back light setting, is there is any change. if it changes and still not attaining the needed brightness level, then you have to check the back light inverter and the CCfL( cold cathode fluorescent lamp) used as back light. if there is no change in the black light, then the logic board or the inverter have some problem.
you have to check the inverter first is it getting the correct voltage from the power supply normally 24v.
if the voltage is ok , then u can do only one thing replace the inverter board to check whether the lamb have any problem. in normal case the inverter will become faulty. lamp fault is rare.

check all these. If you need further assistance fell free to contact me through fixya.
ok

Jan 18, 2011 | Samsung LA40A450 40 in. LCD TV

1 Answer

I used to be able to change picture mode (dynamic fixed) (standard) etc.. but now stuck on standard. I have lost the picture mode option and can't get it back to the brighter richer (dynamic fixed mode). ...


Go in the tv menu,right at bat u in the Picture mode go down the menu to reset push it.The Tuner board will reset it self.It will be set on the Dynantic fixed mode.And the AV mode button on the remote should able to changes back and fourth again Dynamic fix mode,Dynamic mode,Standard mode,User mode,Game mode.Not able to changes by pushing the remote button AV mode to changes,than ur Tuner board have problems,not working properly.

Jun 09, 2010 | Sharp AQUOS LC-52XS1U-S LCD TV

1 Answer

Picture out of focus at times


Firstly, to get a "Shop" standard picture, you need to have a true HD feed. Usually a demo disc filmed in HD at 1080p, played on a true HD system at 1080p into your TV. Most broadcast feeds at present are on 720p.

However, you can improve the picture significantly just by changing a few settings on the TV:

Contrast: Change to about 65% of maximum. Too much
contrast gives a blurry / grainy image.
Sharpness: Change to about 20% of maximum

Also turn of any dynamic or digital contrast settings on the TV (if it has them)



Apr 19, 2009 | Flat Panel Televisions

1 Answer

Picture Mode reverts always to Dynamic after several minutes


The set was a store demo, and the options were set so they could not be adjusted. On instruction from Samsung I pressed MENU and VOLUME buttons on the side of the set and hold for 7 seconds The display reverts to Standard from Dynamic. The Remote Options button showed Store Demo, but now shows Standard. All memory functions seem to function now. Thanks for your help.
Watty2c

Jan 17, 2009 | Samsung LN32A330 32 in. LCD TV

2 Answers

Problems with the picture mode on my samsung 46''


Your TV is in DEMO-STORE MODE.
Go to menu, find Plug & Play option, start it, and when asked, select Home Mode, than Enter and than just Exit.
:-)
Enjoy Your TV!

Jan 09, 2009 | Samsung LN46A550 LCD TV

1 Answer

Poor picture


Dynamic mode will give you a brighter picture. The energy saving mode runs the lamp at a more efficient level that saves energy at the cost of a slightly darker picture. Based upon your description, I'd guess that the lamp is nearing the end of its useful life. Plan on changing the lamp soon. When you do so, place the set back to standard mode and energy saving.
Dan

May 30, 2008 | Samsung LE32R41BD 32 in. HD-Ready LCD...

2 Answers

Samsung LE46F8 picture setting


It sounds like your TV is in Shop Mode.
Shop mode is a set of picture parameters that have been optimized for a store showroom or display floor. Shop mode does not allow you save any picture settings such as brightness or contrast.
To get the TV out of Shop Mode press and hold the Menu button on the front panel for three seconds, the picture will blank momentarily then reappear with “Dynamic Mode” shown on the screen. At this point the picture parameters can be changed and saved.

Feb 16, 2008 | Samsung LN-S4692D 46 in. LCD HDTV

2 Answers

Samsung lcd tv le32r8 (Picture - Movie setting)


The TV is probably in Shop mode, when your TV is initially turned on you can choose between Shop mode or Home Mode.
In Shop mode the TV automaticly returns to the standard setting after a while, they do this so customers can "play" with it.

Press down de Volume button and then hold down the Menu button for five seconds on the side panel of the tv.

Oct 25, 2007 | Samsung LN-R409D 40 in. LCD Television

Not finding what you are looking for?
Samsung LN-T4661F 46 in. LCD HDTV Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Flat Panel Televisions Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Steve McIntosh

Level 1 Expert

11 Answers

brian more

Level 1 Expert

28 Answers

Are you a Samsung Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...