Question about Hoover AAA160 Front Load Washer

3 Answers

Error code 8 on Hoover vision hd 9 kg frontloader. No Manual.

I emptied the machine and put in a new load. Chose the right program and temp. But it would not start. Then the machine would not respond when i try to choose a different program. The display shows: Washing. Done in 9h 4min. And then error code 8 flashes in the display. Please help me. I am afraid an evil spirit has taken over my hoover:)

Tor Henning from Norway.

Posted by on

  • capnbeakey Dec 26, 2008

    gets to the spin cycle then halts for 20 mins the display error code 8 then appears

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Had same problem wouldnt spin found clip on motor had come loose pushed it back on problem solved!

Posted on Feb 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My hoover 1600 a+aa hd mega 9kg washing machine door will not open?

Posted on Nov 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hoover AAA1600 water comes into draw then empies out but thats all it will do? help please

Posted on Sep 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hoover Vision HD 9 kg washing machine, type VHD 916Z. I does not spin when there are clothes in the machine, it just starts the spin then "gives up" after 0.5 to 1 second. When there are no...


Double check the waste pump on the inbound side, which could be the cause of a wrong feedback to the pressure sensor switch. The filter can be clean, but the collector from the basket to the pump can be obstructed.

Jan 26, 2015 | Hoover Washing Machines

1 Answer

Hoover vision hd


the bearing are gone

Jan 18, 2014 | Washing Machines

1 Answer

My hoover vision hd vhc 781 xtb is not heating up


if its not heating on any program the heater element has gone but if its still working fine just use heating from you taps to fill to requires temp or disconect from cold and put it onto the hot out let from your piping just remember not to have it boiling as your clother will shring lol

Sep 24, 2012 | Washing Machines

1 Answer

Error code 09 on hoover vision hd 9kg


Error 9 usually means that there is a problem with a triac on the control board controlling motor action. Program module needs to be replaced.

Best call out Hoover if it is under 1 year old it should be a free repair, if it is over 1 year old the you would have to pay the call out fee, but this includes any parts that are needed to repair the fault and also includes VAT.

Good luck.

May 31, 2011 | Washing Machines

1 Answer

Hi i have error code 4 on my hd vision washing machine can you help


Hi from retired Englishman in SW France,

Error 4 for Hoover HD Vision machines decodes as 'antiflood pressure stat, faulty inlet valve'.
Sorry but that means a repair man visit- nothing we can do other than advise that ;-0(

If this has at least clarified the situation with your washer please consider a 4 thumbs up for the rating.

Thanks and good luck,
John C

Apr 16, 2011 | Hoover Washing Machines

1 Answer

My Hoover 1600 AAA Vision HD 8 kg. Washing machine will not open the door after programs are ended. I can run all programs, but when finished the door will not unlock! What is wrong? I dont have the...


try pushing the door really hard if it opens check the door seal is on properly sometimes they pull off when removing clothes they can get trapped in hinges

Jan 17, 2011 | Hoover AAA160 Front Load Washer

1 Answer

Hi i was wondering if you help.my hoover hd vision


my hover washer dryer 1200 spin will not spin water comes into the drum and will not spin

May 12, 2010 | Hoover H160E Front Load Washer

2 Answers

Hoover vision HD 1400 AAA 8kg washing machine - wont start & four flashing lights on timer delay ?????? any advice pls


can I have the instruction how to use for HOOVER vision HD 1400 AA+A. I lost the manual

Feb 01, 2010 | Washing Machines

1 Answer

Error code 9 on hoover vision hd


Dear Carol. I'm writting to you because I encounter the same problem with the same washmachine (Hoover Vision HD 9kg): fill/empty ok but the drum won't turn = error 09!
My guarantee is out of date only from 3 months and Hoover Switzerland won't help me (I have to pay for the reparation more than the machine price!!!)
I've read on another web forum that the problem could be due to an electrical component (BTB12-600BW), but before to try to change it by myself, could you please tell me how did you resolve your problem???
Please, answer me at "maisoui_cyber@hotmail.com"
Thank you
Johan

Jan 10, 2010 | Washing Machines

Not finding what you are looking for?
Hoover AAA160 Front Load Washer Logo

3,559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...