Question about Panasonic Audio Players & Recorders

Open Question

My panasonic sa ak133 system is geting power on , but sound is not coming from radio / Cd and tapes .. Pls. advise , what part & section is faulty ?

Posted by on

5 Suggested Answers

  • 236 Answers

SOURCE: Panasonic SA- AK 133 Music system sorround system not working

this is something a tech expert on electronics can handle. even replacing parts has to be attended by a pro-technician. something is wrong with your DSP processor or system components. it could be the switch only or it could be the processor.

Posted on Mar 31, 2008

SOURCE: My sa-ak40 panasonic cd music

My dear friend the belts of your tape sistem are damaged you need to change him.Good luck

Posted on Jun 02, 2008

SOURCE: radio powers on but no sound

I have the same problem. I'm trying to figure it out too...

Posted on Sep 09, 2008

SOURCE: f61 code coming up on

You gotta change the audio amplifier IC because maybe are on short circuit

Posted on Oct 02, 2008

localwonder
  • 6784 Answers

SOURCE: Panasonic 710u car cd/tuner NO sound from CD section

hi, the lens has failed. it is unable to pick up the audio code that is coded on the disk. this will happen if the dust level reaches critical mass. the lens become hot or time, during play. when there is a good amount of dust present, this will tend to burn into the face of the lens, clouding the reading capabilities of the assembly. simply replacing the lens assembly will fix this issue.

Posted on May 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic sa ak220 wont turn on


The problem is in the audio output ic, it is loading the unit into shutdown. The only option is have the ic in the stereo replaced.

Mar 07, 2012 | Panasonic SC-AK220 CD Shelf System

1 Answer

I was and have been playing our Kenwood stereo system very loudly for some time. Don't worry as we live in a detached house! However, now the sound has completely packed in on the system and I can't hear...


This sounds like a built in job rather than seperate units for each function. If so then there are two possiblities for the problem. First off you have blown the main amp. In these type of units these tend to be a large IC attached to a heat sink. It will have a number of legs (pins) coming out of it. On its side it will have a letter and number code, often like STK4121 or something like it. If it's gone this number (on yours) will help you replace it. The IC will control most amp functions, so you will lose all sound on all channels.
The other cause is a problem with the power supply section. This is more diffcult to solve, but you can start by looking around for burnt or damaged parts.

Dec 09, 2009 | Electronics - Others

1 Answer

SOUND KEEP COMING IN AND OUT,LOUD HISS FROM SPEAKERS


theres a short in the wires either inside the box where the speakers are or the channels are blown.

Jun 07, 2009 | Panasonic SC-AK78 CD Shelf System

1 Answer

Speakers are connected to pre-amp or power-amp? pls explain connections , what connects with what , between cd player + pre amp + power amp + speakers.


Do this, CD audio out jacks to the PRE-AMP INPUT jacks, then PRE-AMP OUT jacks to AMPLIFIER INPUTS then from AMPLIFIER to speakers, This will work similiar with any sound source unit ie. Radio Tuner, Tape deck, etc. Just think of it this way, a PRE-AMP is BEFORE the AMPLIFIER, all the AMPLIFIER is going to do is AMPLIFY the sound to your speakers, HOPE THIS HELPS!

Feb 03, 2009 | Audio Players & Recorders

3 Answers

Panasonic SA-AK27


Learn to spell first before you call someone a "dumass," *******.

Nov 28, 2008 | Panasonic SC-AK27 Shelf System

1 Answer

Panasonic SA- AK 133 Music system sorround system not working


this is something a tech expert on electronics can handle. even replacing parts has to be attended by a pro-technician. something is wrong with your DSP processor or system components. it could be the switch only or it could be the processor.

Mar 29, 2008 | Audio Players & Recorders

7 Answers

Panasonic SA VK550 - F61 eror


Hi, i had the same problem with a panasonic player, when you see the code F61 in the screen it is because the audio output IC is defective,change that and the set will work perfectly. hope it work.

Feb 05, 2008 | Panasonic SC-AK33 CD Shelf System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4872 Answers

kakima

Level 3 Expert

102366 Answers

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...