Question about Network & Wireless Adapters

1 Answer

Lan & sound drivers problem in linux

Hello
sir/madam
I have Asus (M2N-VM HDMI ), I was installed RHEL 5.0 (linux) after installation lan & sound drivers are not installed by default i dont have linux drivers .suggest me how to solve this problem

Posted by on

  • Anonymous Jan 17, 2009

    where we can get Asus lan drivers for linux 5.0

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ygfgdfghdfg

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dell lan card is not working,i cannot connect to internet.


Either the LAN card is faulty or the LAN driver is not installed and/or not configured properly or the LAN cable is faulty.
Check Device Manager to see if the LAN driver is installed, working and enabled. If not then re-install the LAN card driver.
If the LAN driver won't install or detect the LAN card then it maybe faulty and needs to be replaced.
Try a different LAN cable.
Is all the LEDs on in the modem?
Try rebooting the modem (power it off for 30 secs and power it up again).

Nov 14, 2009 | Dell Ethernet Card Network Adapter

1 Answer

Asus m2n mx lan drivers downloads


I need driver 1394 net adapter for my computer, the computer is not lapt

Mar 31, 2009 | AB Soft Network & Wireless Adapters

2 Answers

How do i install broadcom 802.11b/g wlan in ubuntu


best bet would be to ask that question in linux forums. you have have to use ndiswrapper and install windows drivers.

Mar 13, 2009 | Broadcom (BCM94318MPG) 802.11g/b Wireless...

1 Answer

Linux does not recognize my wireless card


you have to installed the linux support driver of your usb adapter

Mar 12, 2009 | Network & Wireless Adapters

2 Answers

Hello sir Dlink lan card driver DFE 520tX plz. driver downloeding


please find the link for D-Link 520Tx Lan card

http://ftp.dlink.ru/pub/Adapter/DFE-520TX/Drivers/DFE-520TX_A1_Driver_v1.00.rar

Dec 30, 2008 | D-Link DFE-530TX Network Adapter

1 Answer

Driver for d-link dwl 520 wireless PCI card for LINUX OS


please go to the following web site and download the Driver and Instructions--

http://www.cyberciti.biz/tips/linux-install-and-configure-dlink-dwl-g-520-wireless-lan-pci-card.html

Nov 14, 2008 | D-Link Air DWL 520 802.11b (DWL-520)...

4 Answers

Rtl 8139D drivers for Red Hat 5 enterprise edition


I have no choice and open terminal then type “init 0′ (shutdown) :D. Then switch back to Windows XP to find the type of driver I need to install on Linux RHEL 5 and find solution over the internet. Noticed that I am using Realtek RTL8139/810x for NIC on Windows. After that, quickly go to the internet to find “how to install Realtek RTL8139/810x on Linux RHEL 5“. Then, I found that many crappy thing and **** suggestion over the forum. I read almost all Linux forum and follow all the sugesstion included to use ndiswrapper to install that Realtek NIC driver. But it doesn’t work on my machine. Yes I confess that I am new in this matter and perhaps ndiswrapper is too advanced for me.
Then, I have decided to try and error. I go to Realtek official website to see if I can get the specific driver for Linux. Found that:
RTL8100B(L)/RTL8100C(L)/RTL8101L/RTL8139C(L)
RTL8139C(L)+/RTL8139D(L)/RTL8100(L)
RTL8130/RTL8139B(L)
all at the same download page. Then I made I my own conclusion that, Realtek8100 or Realtek8101 can be use as well since I can’t find any RTL8139 driver for linux over the internet. Too not wasting your time to read my crappy story, then download this driver over HERE. DOWNLOAD DRIVER HERE, before that make sure you login as root. After download complete, just write the following command on your terminal:
[root@localhost ~]# cd Desktop (i put the file on Desktop)
[root@localhost Desktop]# tar xvvf r8101-1.001.00.tar.bz2
.
.
[root@localhost Desktop]# cd r8101-1.001.00
[root@localhost r8101-1.001.00]# make clean modules
.
.
.
[root@localhost r8101-1.001.00]# make install
.
.
[root@localhost r8101-1.001.00]# depmod -a
[root@localhost r8101-1.001.00]# insmod ./src/r8101.ko
[root@localhost r8101-1.001.00]# lsmod | grep r8101
r8101 28688 0 <—if this appear, then you’ve installed the driver successfully:)
Then check if your ip have configured correctly or not
[root@localhost r8101-1.001.00]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1C:25:4D:9A:0A
XXXXX XXXX MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:177 Base address:0×2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1611 errors:0 dropped:0 overruns:0 frame:0
TX packets:1611 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4526976 (4.3 MiB) TX bytes:4526976 (4.3 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Since you can see the ethX which X is 0,1,2,3 (mine is eth0)…. instead of just lo and sit0, then its working now. NIC driver has been installed successfully.
Finally, on your terminal type:
[root@localhost ~]# system-config-network

You can see on hardware tab there are Realtek Semiconductor with status ok. Then, move to Devices tab, and click New > Ethernet connection > Forward > Choose REaltek Semiconductor…. > Forward > then up to you whether want to set DHCP or set static IP.
Now you can open Firefox or Konqueror and start browsing internet happily:)
[p/s] If check again on your terminal with ifconfig -a it should return your local ip address under the eth0 which is 192.168.1.* ; * is 2-255

May 16, 2008 | Zonet Fast Ethernet Adapter Realtek 8139D...

1 Answer

Do i have a lan card installed on my system??


Just check it in the device manager ,, goto device manager by right clicking on my computer... if u have network adapters then u have LAN ... and if u have lan u don need drivers it will be inbuilt ...

Nov 30, 2007 | Compaq 2Mbps Wireless LAN PCI Card for...

Not finding what you are looking for?
Network & Wireless Adapters Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...