Question about Sony ACY-BR81/OB

1 Answer

Broken screen if you hold the psp under the light, you can faintly make out the display, which is fine. other than that, you cannot see anything on the screen . i think it is the backlight as the lcd screen is not cracked or anything like that

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 71 Answers

U need to get another screen fo ur psp

simple and easy

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The machine is a Gateway NV53 laptop. The display is showing a reddish background with grey to black horizontal bars. Is it the inverter?


No that will be the screen itself. If the inverter is bad you will see a very faint picture.
Hook the laptop to an external monitor, if the picture is fine it is definitely the screen itself. If it still experiencing display problems then it will be the motherboard.

Comment back if you need more help.

Sep 13, 2011 | Barcode Scanners

1 Answer

My laptop CPU is working but the monitor is not coming up


If you are able to view the initial screen (BIOS) it shud be fine.. There should be problems with the video driver/any recent change made to the system...

If you are no seeing anything on the screen.. connect the laptop to an external monitor if available and check.. if it works fine then it should be an issue with the Display.

You can try this too... Remove th battery and charger if connected. Press and hold the power button for a minute. This is eliminate all the flea power on the motherboard. Then reconnect the battery/charger and try.

May 31, 2011 | Barcode Scanners

1 Answer

I have a dell 1525 laptop - I replaced the inverter, I replaced LCD the new LCD also had an inverter and I replaced the video card. I still get a faint dark screen. I can hear the music when Winn 7 boots...


Hello, and thanks for using FixYa.

What do you mean you replaced the video card? that is impossible, you would have had to replace the whole mainboard.


Okay you replaced the inverter, I suppose it was a tested and known good condition working inverter? does it work on another machine?

The lcd display, same with inverter? Has it been tested that its backlights work properly?

Then aslong as the small cable between mainboard and inverterboard is connected properly, it should work. But if it does not you have 3 possible causes.


1, Faulty display backlights
2, Faulty inverter board
3, bad cable / inserted wrong or motherboard is not providing the required electricity to the inverterboard.

Oct 16, 2010 | Barcode Scanners

1 Answer

Has a Toshiba Tecra 9000 won't power up. Power light on front is blanking which appears to be a code 3-3-2


The problem is cause due to one of the following: the backlight or the display, check your monitor brightness settings. Sometimes your brightness may accidentally have been all the way turned down, resulting in a blank/dark screen. The monitor controls are on the keyboard, directly above the numeric keys.
Look closely at your laptop's screen if the steps do not restore power to it and if it remains blank. Can you see a faint image on the screen? If so, the backlight may be off due to the LCD "lid close" detector malfunctioning. This malfunction likely happened due to the lid close switch being stuck in the "closed" position even though the lid is open. The switch is located beside the LCD's screen hinges, and tapping the switch a few times should unstick it.
Use an S-Video cable and plug your laptop up to an external monitor, such as your television set. With the laptop and TV hooked up, turn both on and see if your computer's desktop is displayed on the TV. You can also use a fifteen ( 15 )pin monitor desktop monitor by connecting it to the blue fifteen ( 15 ) connector at the side of the laptop if you cannot see anything on screen it is the display problem. If it is, your laptop's display needs to be replaced. If not, your motherboard and/or video subsystem may need to be completely removed and replaced.

Aug 31, 2010 | Barcode Scanners

1 Answer

I can't boot a Symbol MC9090.


She's Broken...contact your dealer or the Motorola Help Desk at 1-800-653-5350.

Oct 02, 2009 | Zebra Symbol Technologies MC909X-G Series...

2 Answers

I was playing with my psp when it just froze like it is hanging and the screen goes shaking like a cd that is hangign..playing one part of the tune over and over again..i tried taking the battery out and...


Fix the Shaking Screen of the PSP First:Turn off your psp completely.
Second:Hold R Trigger,And turn on your psp.You will now be in "Recovery Mode"

Third:Go to CPU Speed.Then set Both Speed in XMB and Speed inUMD/ISO in 333

Last:Click Exit

YOUR DONE

Jun 24, 2009 | Sony ACY-BR81/OB

5 Answers

The psp screen wont turn on


reset it by taking out the battery and putting it back in the hold l and r while you turn it on hope that helps

May 16, 2009 | Sony ACY-BR81/OB

1 Answer

Beoken backlight


u kant
u will have to get another screen 4 ur psp

Nov 18, 2008 | Sony ACY-BR81/OB

4 Answers

Playing psp game in tv using component av cable


i have connect the psp av cable but i can't play psp games plzz guys help!!!!!!!!!!!!!!!!!!!!!!

Apr 18, 2008 | Sony ACY-BR81/OB

1 Answer

Psp power problem


have you tried charging it

Dec 24, 2007 | Sony ACY-BR81/OB

Not finding what you are looking for?
Barcode Scanners Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Barcode Scanners Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

AlienWare
AlienWare

Level 2 Expert

88 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Are you a Sony Barcode Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...