Question about Protron PD-DVR100 DVD Recorder

3 Answers

Why does it keep flashing ''Loading''?

I watched a movie; went to put in another one, and I got the flashing,
"Loading"....that's all it does. I turned it off and turned it back on,
and still got "Loading". I turned it off, unplugged it, and still when I
turn it back on, I continue to get "Loading".

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

My protron dvd recorder will not power on can you tell me what to do?

Posted on Nov 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, I had the same problem with my DVD recorder. I replaced the dvd drive with an internal IDE DVD burner that I got from computer parts supply store. It is not an exact fit as I had to mount it in the case with double sided mounting tape. I had to leave the dvd tray face off as well. Before installing the drive into the case connect the dvd burner to a computer to set the region code to 1. The repair cost me less than $25.

Posted on Dec 06, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 38 Answers

Try cleaning the laser lense

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Sylvania portable dvd keeps cuting on and off everytime I put a movie in but the movie never plays it just says loading and starts cutting on and off


Try putting an audio CD in, if it works fine thats a very good indicator that the laser is going/is bad. A audio CD has much less data to read so it's able to keep up, but not with the DVD.

Aug 19, 2014 | DVD & Blu-Ray Players

1 Answer

I watched two movies on my brand new GPX D1816 and when I went to watch #3 the audio works but the video does not. As a matter of fact, I can hear sound, but only when the yellow video cord is not...


try to put the red (or white) cable an see what is happend, try whit movie #1or2, if is not ok you must contact the service for this apliance who is in your area.

Feb 14, 2010 | GPX D1816 DVD Player

1 Answer

DVD stopped working and won't start again


Try cleaning the lense. Use a q-tip and some rubbing alcohol.

Dec 02, 2009 | Zenith DVP615 Portable DVD Player

1 Answer

DVD Player Not loading Movies


optical sensor is burned out or the spindle is not spinning the disk to read it.

Nov 06, 2009 | Coby DVD-224 DVD Player

1 Answer

Suddenly quit working


Looks like the lens of the player is dirty or damaged. Try a lens cleaner CD first.
http://www.buy.com/prod/maxell-cd-340-cd-lens-cleaner-lens-cleaner/q/loc/111/90049765.html
If it doesn't work then you will have to get the lens replaced. Since the Player is still under warranty use while you still can..

Jun 17, 2008 | Mintek MDP-1770 Portable DVD Player

1 Answer

Disney Princess tv/dvd will not play movies


just use the master password 5963 you must create a new password.

May 31, 2008 | Disney Princess MCP DVD2050P DVD Player

3 Answers

Continuous flashing loading


Same problem here. Nothing seems to work... Pressing any key makes no difference. Disconnected the power - nothing.

Feb 17, 2008 | JVC DRM10 DVD Recorder

1 Answer

Dont know what to do


Probably not much help. but the 1st thing I would do is check to see if the disc is even turning...put it in with label straight up, then when it fails, eject...odds are severely against the disc being oriented the same way if it spins, so if it hasn't moved, the main drive motor is bound up or dead. Either way, return it.

Dec 29, 2007 | Coby DVD-233 DVD Player

3 Answers

Dvd video player


Your DVD player is having a problem reading the disc. This is what is accounting for the pausing and the slow loading times...especially if it plays other movies without hitches. Even if the DVD is cleaned, some scratching on the disc will prevent it from being viewed properly. Blockbuster shoudl give you another disc to try of the same movie if you ask. Also, you can try getting a cleaner for your DVD player to remove dust and help it read discs better.

Dec 26, 2007 | Toshiba SD-3980 DVD Player

1 Answer

JVC DVD PLAYER/VHS COMBO


Besides bounching this off a concrete wall for some satisfaction, try unplugging it for a couple of hours at least four hours and then plug it back in. Wait for it to stop loading and you may be able to watch one movie, two if your lucky before it starts flashing again. I've even sent mine to JVC for repair and got a year out of it but it's flashing again. This JVC item is the biggest piece of junk out there, if you read up on it it's had nothing but problems. Save yourself a lot of headaches and buy a new one and chock it up to experience.

Nov 15, 2007 | JVC HR-XVC19S DVD Player/VCR

Not finding what you are looking for?
Protron PD-DVR100 DVD Recorder Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protron DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68229 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Protron DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...